powered by

Install Handrail and Brackets

From How to Install a Handrail on a Spiral Staircase · Step 6 of 8 · Video by #DADLIFE DIY (Do It Yourself like a Pro !)

Showing 7:17–9:36 of the source video. Watch the full video with every moment.

What happens in this clip

Begin the installation by loosely attaching the handrail brackets to the handrail with screws, ensuring they can still rotate slightly. Mount the top-most bracket first by screwing it into a detected wall stud, but do not fully tighten it. This initial top bracket will help support the handrail. Double-check the height of the handrail at the bottom of the stairs to ensure it aligns with your pre-marked tape guides (e.g., 35 inches from the step nosing). Then, install the middle and bottom brackets, screwing them into the wall studs. The loose fit of the brackets to the handrail allows for minor adjustments in angle and position. Once all brackets are securely screwed into the studs and the handrail is correctly positioned and level with the height markings, fully tighten all the screws connecting the handrail to the brackets and the brackets to the wall. This ensures a solid and stable handrail.

Goal: Securely mount the handrail to the wall at the correct height and spacing.

What's used

Tools

  • Finished Handrail Lowe's (Model #6010P)
  • Handrail Brackets Gate-House (Model #0308874)
  • Screwdriver or Drill
  • Screws

About the full video

This project provides a comprehensive guide on installing a wooden handrail on a staircase. It covers understanding building codes for height and clearance, selecting and pre-finishing the handrail and brackets, and the step-by-step process of securely mounting the handrail to the wall, ensuring it meets safety standards.

Step 6 of 8: Attach Handrail to Brackets

Carefully place the handrail sections onto the support brackets, aligning them with the pre-drilled holes or designated attachment points on the brackets. Depending on the bracket design, you may use screws from below, set screws, or other fastening methods to firmly attach the handrail to each bracket. Ensure the handrail is level and follows the intended line of the staircase.

Open this step in the guide

Every video in How to Install a Handrail on a Spiral Staircase

  1. Step 1: Measure and Mark Handrail Length

  2. Step 2: Cut Handrail Material

  3. Step 3: Prepare Handrail Ends for Connection

  4. Step 4: Locate and Mark Support Brackets

  5. Step 5: Install Handrail Support Brackets

  6. Step 6: Attach Handrail to Brackets

  7. Step 7: Join Handrail Sections (if applicable)

  8. Step 8: Inspect and Test Handrail Stability

How to Install a Handrail on a Spiral Staircase

Install a handrail on a spiral staircase to improve safety and accessibility. This involves measuring, cutting, and securely attaching the handrail to the staircase structure.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Install Handrail and Brackets — How to Install a Handrail on a Spiral Staircase | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.