Assemble Handrail Sections
From How to Install a Handrail on a Spiral Staircase · Step 7 of 8 · Video by Ideals Woods

Showing 0:09–0:12 of the source video. Watch the full video with every moment.
What happens in this clip
Before attaching to the balustrade, individual sections of the handrail are assembled. Wood glue is applied generously to the joint surfaces of two wooden pieces. The pieces are then pressed together to form a strong bond. To further secure the joint and ensure immediate hold while the glue dries, a pneumatic nail gun (like the Meite nail gun seen) is used to drive nails through the joint.
Goal: Join individual wooden handrail pieces together
What's used
Tools
- Air compressor
- Pneumatic nail gun Meite
- Screws and drill
Materials
- Nails (for nail gun)
- Brad nails
- Wood glue
About the full video
This project details the step-by-step process of installing a wooden handrail onto an existing glass balustrade for a staircase. It involves preparing custom-cut wooden sections, assembling them, securely attaching them to the glass, and applying finishing touches for a polished look, resulting in a safe and aesthetically pleasing stair railing.
Step 7 of 8: Join Handrail Sections (if applicable)
If the handrail required multiple sections, join them now according to the method prepared in Step 3. This could involve applying wood glue and clamping mitered or scarf joints, welding metal sections, or using specialized joining hardware. Ensure the joint is smooth, flush, and structurally sound, as it will be a critical point of the handrail.
Every video in How to Install a Handrail on a Spiral Staircase
Step 1: Measure and Mark Handrail Length
- 0:07–0:51 Measure Staircase Length and Angle
- 0:00–0:43 Measure and Cut Handrail
- 2:28–2:44 Measure and Mark Railing for Cuts
Step 2: Cut Handrail Material
- 2:44–3:05 Cut and Fit Handrail
- 0:11–0:13 Cutting Handrail Sections
- 0:00–0:43 Measure and Cut Handrail
Step 3: Prepare Handrail Ends for Connection
Step 4: Locate and Mark Support Brackets
- 2:32–3:05 Mark Top Bracket Location
- 3:05–4:05 Install Mounting Brackets
- 1:23–2:32 Locate Studs and Mark Bottom Bracket
Step 5: Install Handrail Support Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
- 1:13–1:22 Install End Rail Brackets
- 8:12–9:58 Install Handrail Brackets
Step 6: Attach Handrail to Brackets
- 3:35–3:56 Mount Handrail to Brackets
- 2:44–4:28 Attach Handrail to Brackets
- 7:17–9:36 Install Handrail and Brackets
Step 7: Join Handrail Sections (if applicable)
- 0:13–0:20 Initial Handrail Attachment and Joining
- 0:09–0:12 Assemble Handrail Sections (this video)
- 0:21–0:27 Completing Handrail Attachment
Step 8: Inspect and Test Handrail Stability
- 5:36–5:45 Final Check
- 9:33–11:59 Final Inspection and Verification
- 0:07–0:08 Secure and Test the Railing Section
How to Install a Handrail on a Spiral Staircase
Install a handrail on a spiral staircase to improve safety and accessibility. This involves measuring, cutting, and securely attaching the handrail to the staircase structure.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

