Install Brackets and Mount Handrail
From How to Install a Handrail on a Spiral Staircase · Step 5 of 8 · Video by normalguydiy

Showing 2:28–2:44 of the source video. Watch the full video with every moment.
What happens in this clip
Once your bracket locations are marked, pre-drill pilot holes into the wall studs and then securely fasten the handrail brackets using appropriate screws. Start with the top and bottom brackets, ensuring they are level and aligned with your marked line. Then, attach the handrail to these two end brackets. After the ends are secure and the handrail is correctly positioned, install any intermediate (middle) brackets, ensuring they are evenly spaced and also securely fastened to wall studs for maximum support and stability.
Goal: Secure the handrail to the wall using the installed brackets.
What's used
Tools
- Drill/Driver
- Handrail
- Metal pipe
- Handrail brackets
- Pilot drill bit
- Screws
About the full video
This DIY project provides step-by-step instructions for installing a simple handrail on a stairway. It covers determining the correct height, securely mounting brackets into wall studs, cutting and assembling handrail end returns, and finally attaching and checking the stability of the handrail.
Step 5 of 8: Install Handrail Support Brackets
Drill pilot holes at the marked locations on the staircase structure. Then, securely fasten the handrail brackets using screws, bolts, or lag bolts that are appropriate for the material of the staircase (wood, metal, concrete). Ensure each bracket is firmly attached and can withstand significant downward force. Use a level to confirm that brackets are installed in the correct orientation for the handrail to sit properly.
Every video in How to Install a Handrail on a Spiral Staircase
Step 1: Measure and Mark Handrail Length
- 0:07–0:51 Measure Staircase Length and Angle
- 0:00–0:43 Measure and Cut Handrail
- 2:28–2:44 Measure and Mark Railing for Cuts
Step 2: Cut Handrail Material
- 2:44–3:05 Cut and Fit Handrail
- 0:11–0:13 Cutting Handrail Sections
- 0:00–0:43 Measure and Cut Handrail
Step 3: Prepare Handrail Ends for Connection
Step 4: Locate and Mark Support Brackets
- 2:32–3:05 Mark Top Bracket Location
- 3:05–4:05 Install Mounting Brackets
- 1:23–2:32 Locate Studs and Mark Bottom Bracket
Step 5: Install Handrail Support Brackets
- 2:28–2:44 Install Brackets and Mount Handrail (this video)
- 1:13–1:22 Install End Rail Brackets
- 8:12–9:58 Install Handrail Brackets
Step 6: Attach Handrail to Brackets
- 3:35–3:56 Mount Handrail to Brackets
- 2:44–4:28 Attach Handrail to Brackets
- 7:17–9:36 Install Handrail and Brackets
Step 7: Join Handrail Sections (if applicable)
- 0:13–0:20 Initial Handrail Attachment and Joining
- 0:09–0:12 Assemble Handrail Sections
- 0:21–0:27 Completing Handrail Attachment
Step 8: Inspect and Test Handrail Stability
- 5:36–5:45 Final Check
- 9:33–11:59 Final Inspection and Verification
- 0:07–0:08 Secure and Test the Railing Section
How to Install a Handrail on a Spiral Staircase
Install a handrail on a spiral staircase to improve safety and accessibility. This involves measuring, cutting, and securely attaching the handrail to the staircase structure.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

