Install Handrail Brackets
From How to Install a Handrail on a Spiral Staircase · Step 5 of 8 · Video by Homemade Home

Showing 8:12–9:58 of the source video. Watch the full video with every moment.
What happens in this clip
Using a laser level, project a straight line along the staircase wall at the desired height for the handrail. Mark the precise locations for the handrail brackets along this line, ensuring they align with wall studs for secure attachment. Drill pilot holes into the marked locations, deep enough to accommodate the screws for the brackets. Secure each handrail bracket to the wall using a drill and appropriate screws, ensuring they are firmly anchored.
Goal: Mount support brackets onto the staircase wall.
What's used
Tools
- Cordless Drill Milwaukee
- Drill Bits Unspecified
- Handrail Brackets Unspecified
- Laser Level Unspecified
- level line on the wall for accurate bracket placement.
- Pencil Unspecified
- Screws (for mounting brackets) Unspecified
About the full video
This video details the process of fabricating a custom handrail from raw lumber, preparing it with a finish coat, and then installing it securely onto a staircase wall using specialized brackets. The project emphasizes cost-effective material choices and precise installation techniques to create a durable and aesthetically pleasing banister.
What's said in this clip
however it happens. You'll have to forgive the low light, but I want to show a couple of details. These are the handrail brackets. So, there's a single screw in the center, and then you can just drive it in. and leave it just a teensy bit loose. And then that you just pivot it. And that allows you to then put these two screws on uh in up into the handrail versus the tight that goes vertical. And then this little piece is like a loose piece that pivots to match the angle. This costs a couple dollars more to get these, but they're heavier duty. They look better than that sort of economy handrail uh bracket and it's easier. And so I think that little bit of ease to where you just make sure you get them all in the same line and then just rotate that to the right angle to match your handrail is a much better way to go about it. Uh it is relying on just a single screw, but it's a nice heavy duty screw. And I went with four. And that's just the spacing of the studs in this house. It's like weird uneven big spacing 2 ft. Um but yeah, uh the handrails right here.
Automatically transcribed from the source video.
Step 5 of 8: Install Handrail Support Brackets
Drill pilot holes at the marked locations on the staircase structure. Then, securely fasten the handrail brackets using screws, bolts, or lag bolts that are appropriate for the material of the staircase (wood, metal, concrete). Ensure each bracket is firmly attached and can withstand significant downward force. Use a level to confirm that brackets are installed in the correct orientation for the handrail to sit properly.
Every video in How to Install a Handrail on a Spiral Staircase
Step 1: Measure and Mark Handrail Length
- 0:07–0:51 Measure Staircase Length and Angle
- 0:00–0:43 Measure and Cut Handrail
- 2:28–2:44 Measure and Mark Railing for Cuts
Step 2: Cut Handrail Material
- 2:44–3:05 Cut and Fit Handrail
- 0:11–0:13 Cutting Handrail Sections
- 0:00–0:43 Measure and Cut Handrail
Step 3: Prepare Handrail Ends for Connection
Step 4: Locate and Mark Support Brackets
- 2:32–3:05 Mark Top Bracket Location
- 3:05–4:05 Install Mounting Brackets
- 1:23–2:32 Locate Studs and Mark Bottom Bracket
Step 5: Install Handrail Support Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
- 1:13–1:22 Install End Rail Brackets
- 8:12–9:58 Install Handrail Brackets (this video)
Step 6: Attach Handrail to Brackets
- 3:35–3:56 Mount Handrail to Brackets
- 2:44–4:28 Attach Handrail to Brackets
- 7:17–9:36 Install Handrail and Brackets
Step 7: Join Handrail Sections (if applicable)
- 0:13–0:20 Initial Handrail Attachment and Joining
- 0:09–0:12 Assemble Handrail Sections
- 0:21–0:27 Completing Handrail Attachment
Step 8: Inspect and Test Handrail Stability
- 5:36–5:45 Final Check
- 9:33–11:59 Final Inspection and Verification
- 0:07–0:08 Secure and Test the Railing Section
How to Install a Handrail on a Spiral Staircase
Install a handrail on a spiral staircase to improve safety and accessibility. This involves measuring, cutting, and securely attaching the handrail to the staircase structure.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

