Final Inspection and Verification
From How to Install a Handrail on a Spiral Staircase · Step 8 of 8 · Video by Skill Builder

Showing 9:33–11:59 of the source video. Watch the full video with every moment.
What happens in this clip
Once all structural elements and balustrade components are installed using the described methods, perform a final inspection. Test the stability of the newel posts and handrails by firmly wiggling them. The staircase should feel completely solid, with no movement or creaking. Confirm that all screws are driven in flush or countersunk, and that all glued joints are firm. The precise cuts, polyurethane glue, and strategic screwing should result in a robust and silent staircase, a testament to modern construction techniques.
Goal: Verify the stability and quality of the installed staircase and balustrade
About the full video
This project provides a comprehensive guide on installing a staircase balustrade, specifically focusing on how balusters (spindles) and handrails are secured. It highlights a modern construction technique that foregoes traditional wedges and draw-dowels in favor of precise cuts, polyurethane glue, and strategic screwing, aiming for a silent, durable, and structurally sound staircase. The video demonstrates the installation process and offers detailed explanations countering conventional methods.
Step 8 of 8: Inspect and Test Handrail Stability
Apply firm downward pressure to various points along the handrail, especially at joints and bracket locations. Check for any signs of looseness, wobbling, or creaking. Ensure all fasteners are tight and that the handrail is securely fixed to the staircase structure. Confirm that the handrail height and clearance meet local building codes.
Every video in How to Install a Handrail on a Spiral Staircase
Step 1: Measure and Mark Handrail Length
- 0:07–0:51 Measure Staircase Length and Angle
- 0:00–0:43 Measure and Cut Handrail
- 2:28–2:44 Measure and Mark Railing for Cuts
Step 2: Cut Handrail Material
- 2:44–3:05 Cut and Fit Handrail
- 0:11–0:13 Cutting Handrail Sections
- 0:00–0:43 Measure and Cut Handrail
Step 3: Prepare Handrail Ends for Connection
Step 4: Locate and Mark Support Brackets
- 2:32–3:05 Mark Top Bracket Location
- 3:05–4:05 Install Mounting Brackets
- 1:23–2:32 Locate Studs and Mark Bottom Bracket
Step 5: Install Handrail Support Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
- 1:13–1:22 Install End Rail Brackets
- 8:12–9:58 Install Handrail Brackets
Step 6: Attach Handrail to Brackets
- 3:35–3:56 Mount Handrail to Brackets
- 2:44–4:28 Attach Handrail to Brackets
- 7:17–9:36 Install Handrail and Brackets
Step 7: Join Handrail Sections (if applicable)
- 0:13–0:20 Initial Handrail Attachment and Joining
- 0:09–0:12 Assemble Handrail Sections
- 0:21–0:27 Completing Handrail Attachment
Step 8: Inspect and Test Handrail Stability
- 5:36–5:45 Final Check
- 9:33–11:59 Final Inspection and Verification (this video)
- 0:07–0:08 Secure and Test the Railing Section
How to Install a Handrail on a Spiral Staircase
Install a handrail on a spiral staircase to improve safety and accessibility. This involves measuring, cutting, and securely attaching the handrail to the staircase structure.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

