Assemble Wooden Handrail Sections with Dowels
From How to Install a Handrail on a Spiral Staircase · Step 3 of 8 · Video by Essential Craftsman

Showing 7:00–10:54 of the source video. Watch the full video with every moment.
What happens in this clip
After preparing the wooden templates, the actual wooden handrail sections are cut from the same white oak using a miter saw to achieve the necessary angles. Custom wooden dowels, turned on a lathe from the same oak stock, are used to reinforce the mitered joints. Wood glue is applied to the dowels and the mitered surfaces. The dowels are then inserted into pre-drilled holes in the handrail sections and tapped into place with a hammer, creating strong, invisible joints. Excess glue is immediately wiped away with a damp cloth or paper towel to ensure a clean finish. Once the glue has cured, the protruding dowels are cut flush with the handrail surface and sanded smooth.
Goal: Permanently join wooden handrail sections using dowels and glue.
What's used
Tools
- Acetone
- Denatured alcohol
- Hammer
- Miter saw Makita
- Rags/Paper towels
- Wood glue Titebond
- Wood lathe
- Wooden dowels (custom-made)
About the full video
This project details the process of fabricating and installing a custom wooden handrail with wrought iron brackets, emphasizing precision micro-joint techniques for complex angles around a staircase winder. It covers the creation of custom metal brackets, the use of wooden templates and dowel joinery for the handrail sections, and the final installation and finishing for a seamless, code-compliant result.
Step 3 of 8: Prepare Handrail Ends for Connection
Depending on the handrail system and material, this may involve chamfering edges, drilling holes for connecting hardware, or preparing surfaces for welding or adhesive bonding. For wood handrails, this might include creating specific joint types like mitered or scarf joints. For metal, it could involve grinding edges for welding or preparing for threaded connectors.
Every video in How to Install a Handrail on a Spiral Staircase
Step 1: Measure and Mark Handrail Length
- 0:07–0:51 Measure Staircase Length and Angle
- 0:00–0:43 Measure and Cut Handrail
- 2:28–2:44 Measure and Mark Railing for Cuts
Step 2: Cut Handrail Material
- 2:44–3:05 Cut and Fit Handrail
- 0:11–0:13 Cutting Handrail Sections
- 0:00–0:43 Measure and Cut Handrail
Step 3: Prepare Handrail Ends for Connection
- 7:00–10:54 Assemble Wooden Handrail Sections with Dowels (this video)
- 9:59–12:24 Assembling Wooden Handrail with Dowels & Glue
- 9:39–13:17 Preparing and Cutting Mitered Handrail Sections
Step 4: Locate and Mark Support Brackets
- 2:32–3:05 Mark Top Bracket Location
- 3:05–4:05 Install Mounting Brackets
- 1:23–2:32 Locate Studs and Mark Bottom Bracket
Step 5: Install Handrail Support Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
- 1:13–1:22 Install End Rail Brackets
- 8:12–9:58 Install Handrail Brackets
Step 6: Attach Handrail to Brackets
- 3:35–3:56 Mount Handrail to Brackets
- 2:44–4:28 Attach Handrail to Brackets
- 7:17–9:36 Install Handrail and Brackets
Step 7: Join Handrail Sections (if applicable)
- 0:13–0:20 Initial Handrail Attachment and Joining
- 0:09–0:12 Assemble Handrail Sections
- 0:21–0:27 Completing Handrail Attachment
Step 8: Inspect and Test Handrail Stability
- 5:36–5:45 Final Check
- 9:33–11:59 Final Inspection and Verification
- 0:07–0:08 Secure and Test the Railing Section
How to Install a Handrail on a Spiral Staircase
Install a handrail on a spiral staircase to improve safety and accessibility. This involves measuring, cutting, and securely attaching the handrail to the staircase structure.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

