Initial Handrail Attachment and Joining
From How to Install a Handrail on a Spiral Staircase · Step 7 of 8 · Video by Ideals Woods

Showing 0:13–0:20 of the source video. Watch the full video with every moment.
What happens in this clip
Place the first section of the cut handrail onto the installed brackets. If connecting multiple sections, apply wood glue to the mitered end of one section before aligning and joining it to the next. Use a pneumatic nail gun to temporarily secure the handrail sections together and to the top of the brackets. Follow up by driving screws from the underside of the handrail into the brackets using a drill/driver, ensuring a strong, permanent attachment.
Goal: Mount handrail sections and connect them
What's used
Tools
- Drill/Driver Hitachi/Hikoki
- Handrail Sections
- Pneumatic Nail Gun Meite
- Hammer and finishing nails
Materials
- Nails
- Screws
- Wood Glue
- Construction adhesive
About the full video
This project details the installation of a wall-mounted wooden handrail along a staircase. The process involves accurately marking the handrail's path, drilling and securing mounting brackets to the wall, precisely cutting and joining wooden handrail sections, and finally, attaching the handrail to the brackets. The finishing touches include filling any gaps in the wood joints and sealing the edges where the handrail meets the wall for a clean, professional appearance.
Step 7 of 8: Join Handrail Sections (if applicable)
If the handrail required multiple sections, join them now according to the method prepared in Step 3. This could involve applying wood glue and clamping mitered or scarf joints, welding metal sections, or using specialized joining hardware. Ensure the joint is smooth, flush, and structurally sound, as it will be a critical point of the handrail.
Every video in How to Install a Handrail on a Spiral Staircase
Step 1: Measure and Mark Handrail Length
- 0:07–0:51 Measure Staircase Length and Angle
- 0:00–0:43 Measure and Cut Handrail
- 2:28–2:44 Measure and Mark Railing for Cuts
Step 2: Cut Handrail Material
- 2:44–3:05 Cut and Fit Handrail
- 0:11–0:13 Cutting Handrail Sections
- 0:00–0:43 Measure and Cut Handrail
Step 3: Prepare Handrail Ends for Connection
Step 4: Locate and Mark Support Brackets
- 2:32–3:05 Mark Top Bracket Location
- 3:05–4:05 Install Mounting Brackets
- 1:23–2:32 Locate Studs and Mark Bottom Bracket
Step 5: Install Handrail Support Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
- 1:13–1:22 Install End Rail Brackets
- 8:12–9:58 Install Handrail Brackets
Step 6: Attach Handrail to Brackets
- 3:35–3:56 Mount Handrail to Brackets
- 2:44–4:28 Attach Handrail to Brackets
- 7:17–9:36 Install Handrail and Brackets
Step 7: Join Handrail Sections (if applicable)
- 0:13–0:20 Initial Handrail Attachment and Joining (this video)
- 0:09–0:12 Assemble Handrail Sections
- 0:21–0:27 Completing Handrail Attachment
Step 8: Inspect and Test Handrail Stability
- 5:36–5:45 Final Check
- 9:33–11:59 Final Inspection and Verification
- 0:07–0:08 Secure and Test the Railing Section
How to Install a Handrail on a Spiral Staircase
Install a handrail on a spiral staircase to improve safety and accessibility. This involves measuring, cutting, and securely attaching the handrail to the staircase structure.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

