Final Check
From How to Install a Handrail on a Spiral Staircase · Step 8 of 8 · Video by Optimum Works Inc.

Showing 5:36–5:45 of the source video. Watch the full video with every moment.
What happens in this clip
After all brackets are installed and the handrail is securely attached, perform a final check. Gently apply pressure to different sections of the handrail to ensure it is sturdy and does not wobble. The installer confirms that the handrail is "very sturdy," indicating a successful installation. Address any loose points or concerns by tightening screws or reassessing the bracket attachment if necessary.
Goal: Verify handrail stability and security
What's used
Tools
- Installed Handrail Optimum Works
About the full video
This project provides a step-by-step guide on how to install a handrail on a staircase. The process involves accurately marking the handrail's height and angle, locating wall studs for secure bracket placement, drilling pilot holes, and then fastening the brackets and handrail using appropriate screws or bolts. An alternative method for securing brackets using drywall anchors when studs are not accessible is also demonstrated.
Step 8 of 8: Inspect and Test Handrail Stability
Apply firm downward pressure to various points along the handrail, especially at joints and bracket locations. Check for any signs of looseness, wobbling, or creaking. Ensure all fasteners are tight and that the handrail is securely fixed to the staircase structure. Confirm that the handrail height and clearance meet local building codes.
Every video in How to Install a Handrail on a Spiral Staircase
Step 1: Measure and Mark Handrail Length
- 0:07–0:51 Measure Staircase Length and Angle
- 0:00–0:43 Measure and Cut Handrail
- 2:28–2:44 Measure and Mark Railing for Cuts
Step 2: Cut Handrail Material
- 2:44–3:05 Cut and Fit Handrail
- 0:11–0:13 Cutting Handrail Sections
- 0:00–0:43 Measure and Cut Handrail
Step 3: Prepare Handrail Ends for Connection
Step 4: Locate and Mark Support Brackets
- 2:32–3:05 Mark Top Bracket Location
- 3:05–4:05 Install Mounting Brackets
- 1:23–2:32 Locate Studs and Mark Bottom Bracket
Step 5: Install Handrail Support Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
- 1:13–1:22 Install End Rail Brackets
- 8:12–9:58 Install Handrail Brackets
Step 6: Attach Handrail to Brackets
- 3:35–3:56 Mount Handrail to Brackets
- 2:44–4:28 Attach Handrail to Brackets
- 7:17–9:36 Install Handrail and Brackets
Step 7: Join Handrail Sections (if applicable)
- 0:13–0:20 Initial Handrail Attachment and Joining
- 0:09–0:12 Assemble Handrail Sections
- 0:21–0:27 Completing Handrail Attachment
Step 8: Inspect and Test Handrail Stability
- 5:36–5:45 Final Check (this video)
- 9:33–11:59 Final Inspection and Verification
- 0:07–0:08 Secure and Test the Railing Section
How to Install a Handrail on a Spiral Staircase
Install a handrail on a spiral staircase to improve safety and accessibility. This involves measuring, cutting, and securely attaching the handrail to the staircase structure.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

