Locate Studs and Mark Bottom Bracket
From How to Install a Handrail on a Spiral Staircase · Step 4 of 8 · Video by Rusty Dog & Co.

Showing 1:23–2:32 of the source video. Watch the full video with every moment.
What happens in this clip
Using a stud finder, locate the wall studs along the staircase. Mark these stud locations with painter's tape. To determine the exact placement for the mounting brackets, first measure the overall height of the handrail itself. Then, measure the height of the mounting bracket. Subtract the height of the handrail from the desired total height (marked in the previous step) to find the 'X amount'. Subtract this 'X amount' from the total height to determine where the bottom of the mounting bracket should sit. Transfer this measurement from the stair tread nose to the wall, aligning with a stud, and mark it. Repeat this process for the bottom-most bracket.
What's used
Tools
- Painter's Tape
- Pencil
- Stud Finder
- Tape Measure
About the full video
This video demonstrates the step-by-step process of installing a new wooden handrail on a staircase. It covers measuring for proper height and angle, locating wall studs, cutting the handrail to size with appropriate angles, assembling the return pieces, and securely mounting the handrail to the wall brackets. Note: The user prompt describes 'refinishing via stain application', however, the video demonstrates the installation of a new handrail and only briefly mentions applying finish off-camera, without showing any staining or surface preparation for refinishing.
Step 4 of 8: Locate and Mark Support Brackets
Examine the spiral staircase structure to determine the most robust locations for attaching handrail brackets. These are typically along the outer stringer, inner stringer, or directly to the treads/risers if structural integrity allows. Mark the precise locations for each bracket, ensuring they are evenly spaced and at the correct height to meet building code requirements for handrail installation.
Every video in How to Install a Handrail on a Spiral Staircase
Step 1: Measure and Mark Handrail Length
- 0:07–0:51 Measure Staircase Length and Angle
- 0:00–0:43 Measure and Cut Handrail
- 2:28–2:44 Measure and Mark Railing for Cuts
Step 2: Cut Handrail Material
- 2:44–3:05 Cut and Fit Handrail
- 0:11–0:13 Cutting Handrail Sections
- 0:00–0:43 Measure and Cut Handrail
Step 3: Prepare Handrail Ends for Connection
Step 4: Locate and Mark Support Brackets
- 2:32–3:05 Mark Top Bracket Location
- 3:05–4:05 Install Mounting Brackets
- 1:23–2:32 Locate Studs and Mark Bottom Bracket (this video)
Step 5: Install Handrail Support Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
- 1:13–1:22 Install End Rail Brackets
- 8:12–9:58 Install Handrail Brackets
Step 6: Attach Handrail to Brackets
- 3:35–3:56 Mount Handrail to Brackets
- 2:44–4:28 Attach Handrail to Brackets
- 7:17–9:36 Install Handrail and Brackets
Step 7: Join Handrail Sections (if applicable)
- 0:13–0:20 Initial Handrail Attachment and Joining
- 0:09–0:12 Assemble Handrail Sections
- 0:21–0:27 Completing Handrail Attachment
Step 8: Inspect and Test Handrail Stability
- 5:36–5:45 Final Check
- 9:33–11:59 Final Inspection and Verification
- 0:07–0:08 Secure and Test the Railing Section
How to Install a Handrail on a Spiral Staircase
Install a handrail on a spiral staircase to improve safety and accessibility. This involves measuring, cutting, and securely attaching the handrail to the staircase structure.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

