Organize and Conceal Wiring
From How to Cut and Join LED Strip Lights Around Stair Corners · Step 7 of 7 · Video by Zibartas

Showing 3:52–4:19 of the source video. Watch the full video with every moment.
What happens in this clip
With all electrical connections complete, tidy up the wiring. Use small zip ties to bundle the LED strand wires with the newly added power injection wires, reducing cable clutter. Route these grouped wires discreetly along the baseboards and into a cable organizer or conduit that leads to the hidden power supply (e.g., in a closet, as shown in the video). This ensures a clean and professional appearance for the entire installation. For a garage, proper cable management is not just aesthetic but also a safety measure to prevent tripping hazards and protect wires from damage.
Goal: Group and secure all power and data wires using zip ties, then route them neatly along the wall and into a cable organizer.
What's used
Tools
- Cable Organizer or Conduit
- Zip Ties
About the full video
This video details the step-by-step process of constructing a large, programmable LED wall array with Wi-Fi control, suitable for dynamic decorative lighting or as an interactive display. The project involves custom painting the LED strands, creating diffusers from ping-pong balls, installing the array on a wall, and setting up a micro-controller with specialized firmware for advanced control and animation. While the video showcases a room installation, the principles could be adapted for creative garage lighting with enhanced functionality.
What's said in this clip
and put on the ping pong balls i solder all the extra power wires and then cover them in shrink tube sadly i didn't have any white shrink tube in stock so i used black one i just need to remember to paint it to reduce the spaghetti factor i'm using some zip ties to group the led wires with the power wires the power supply is in the closet so i'm using a cable organizer to route all the wires there with all the wires hidden and grouped it's actually a pretty clean look
Automatically transcribed from the source video.
Step 7 of 7: Secure and Conceal Wiring
Once the lights are working, neatly organize and secure all visible wires. Use cable ties, adhesive clips, or raceways to route wires along the underside of the stairs, behind walls, or in other discreet locations. Ensure wires are not pinched, stressed, or in a position where they could be tripped over or damaged. Carefully tuck away any excess wire. If power supply is external, ensure it is placed in a well-ventilated area and is accessible.
Every video in How to Cut and Join LED Strip Lights Around Stair Corners
Step 1: Plan LED Strip Layout
- 0:00–0:02 Plan and Gather Components
- 0:00–0:19 Install Flexible LED Strip Lighting
- 5:35–6:58 Plan Light Placement and Spacing
Step 2: Cut LED Strips to Length
- 0:02–0:07 Cut LED Strip to Length
- 0:09–2:00 Cut the LED Strip to Length
- 7:29–8:41 Measure and Cut the LED Strip
Step 3: Prepare LED Strip Ends for Connection
- 0:52–1:41 Prepare and Connect LED Strips
- 8:41–10:19 Attach Solderless Connectors
- 0:59–1:26 Prepare Strip Ends
Step 4: Join LED Strips (if necessary)
- 1:49–2:53 Connect Strip Sections
- 1:47–5:03 Connect LED Strips (Plug-and-Play or Soldering)
- 0:03–0:09 Connect the LED Strips Using a Corner Connector
Step 5: Mount LED Strips to Stairs
- 0:00–0:00 Adhere LED Strips to Stair Treads
- 0:10–0:12 Install LED Strips on Stair Treads
- 0:00–0:19 Install Flexible LED Strip Lighting
Step 6: Connect Power Supply and Test
- 3:03–3:19 Connect Power Supply and Test
- 0:09–0:12 Wiring and Power Connection
- 1:11–1:33 Power Up and Test
Step 7: Secure and Conceal Wiring
- 0:00–0:00 Connect Power and Conceal Wiring
- 0:12–0:15 Conceal and Finish
- 3:52–4:19 Organize and Conceal Wiring (this video)
Questions about How to Cut and Join LED Strip Lights Around Stair Corners
Do I really need to solder to join LED strips around stair corners, or are there easier methods?
While soldering provides the most reliable and secure connection for long-term use, you can also use solderless connectors. The project lists L-shape connectors (P700016-000) specifically for corners, which can be an easier alternative if you're uncomfortable with soldering. Ensure they are compatible with your LED strip's width and pin configuration.
What are the most common mistakes beginners make when cutting and joining LED strips, and how can I avoid them?
A common mistake is cutting the LED strip anywhere other than the designated cut lines, which will damage the circuit. Always ensure you align the positive and negative terminals correctly when joining strips, as reversed polarity will prevent them from lighting up. Additionally, make sure all connections, whether soldered or solderless, are firm to prevent flickering or disconnections.
What safety precautions should I take when using a soldering iron and working with low-voltage electrical components?
When soldering, always work in a well-ventilated area to avoid inhaling fumes, and use a heat-resistant mat to protect your work surface. Be extremely careful as soldering irons get very hot. For all electrical work, even low-voltage, always disconnect the power supply before making or adjusting any connections to prevent short circuits.
How can I ensure my LED strips stay securely attached to the stairs, especially around corners?
To ensure secure adhesion, clean the stair surface thoroughly before applying the strips. Use the adhesion promoter (like 3M Automotive Adhesion Promoter) as directed, followed by the LED strip's adhesive backing. You can reinforce with strong double-sided mounting tape, especially on curved areas or corners, for extra security.
The project difficulty is 'beginner,' but what specific skills will I need to learn or practice for this?
As a beginner, the main skills to practice for this project are precise cutting of the LED strips at marked points and basic soldering techniques if you choose that method. Understanding polarity (positive/negative) is also crucial for proper connections. Watching a few video tutorials on these specific tasks beforehand can greatly increase your confidence and success.
What should I do if my LED strip doesn't light up after installation, or only part of it works?
First, ensure the power supply is properly connected and receiving power. Then, carefully check all your connections, both at the power supply and between LED strip segments, to confirm they are secure and that polarity (positive to positive, negative to negative) is correct. Inspect your cut points to ensure no circuits were damaged and that the connection points are clean.
How to Cut and Join LED Strip Lights Around Stair Corners
A high-level outline for installing LED strip lights around stair corners, focusing on cutting, joining, and mounting techniques.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

