Cut LED Strip to Length
From How to Cut and Join LED Strip Lights Around Stair Corners · Step 2 of 7 · Video by Tasty Home

Showing 0:02–0:07 of the source video. Watch the full video with every moment.
What happens in this clip
Start with an LED light strip. Identify the designated cut lines along the strip, which are typically marked with copper pads and a scissor icon or a simple line. Using a pair of scissors, carefully cut the LED strip at one of these marked cut lines to achieve the desired length for your installation. This ensures proper electrical contact points remain intact.
Goal: The LED strip is cut at designated marks to the required length using scissors.
What's used
Tools
- LED light strip
- Scissors
About the full video
This project demonstrates how to install LED light strips using their integrated adhesive backing to create various lighting effects for indoor and outdoor spaces. It covers cutting the strip to size, connecting a power adapter, and securely attaching the strip to a surface.
Step 2 of 7: Cut LED Strips to Length
LED strips are designed to be cut at specific intervals, usually marked with a small scissor icon or a copper pad. Measure the required length for each stair segment based on your planning. Carefully align your cutting tool with the designated cut line on the LED strip. Make a clean, straight cut. It is critical to cut only at the indicated points to avoid damaging the internal circuitry of the LED strip.
Every video in How to Cut and Join LED Strip Lights Around Stair Corners
Step 1: Plan LED Strip Layout
- 0:00–0:02 Plan and Gather Components
- 0:00–0:19 Install Flexible LED Strip Lighting
- 5:35–6:58 Plan Light Placement and Spacing
Step 2: Cut LED Strips to Length
- 0:02–0:07 Cut LED Strip to Length (this video)
- 0:09–2:00 Cut the LED Strip to Length
- 7:29–8:41 Measure and Cut the LED Strip
Step 3: Prepare LED Strip Ends for Connection
- 0:52–1:41 Prepare and Connect LED Strips
- 8:41–10:19 Attach Solderless Connectors
- 0:59–1:26 Prepare Strip Ends
Step 4: Join LED Strips (if necessary)
- 1:49–2:53 Connect Strip Sections
- 1:47–5:03 Connect LED Strips (Plug-and-Play or Soldering)
- 0:03–0:09 Connect the LED Strips Using a Corner Connector
Step 5: Mount LED Strips to Stairs
- 0:00–0:00 Adhere LED Strips to Stair Treads
- 0:10–0:12 Install LED Strips on Stair Treads
- 0:00–0:19 Install Flexible LED Strip Lighting
Step 6: Connect Power Supply and Test
- 3:03–3:19 Connect Power Supply and Test
- 0:09–0:12 Wiring and Power Connection
- 1:11–1:33 Power Up and Test
Step 7: Secure and Conceal Wiring
- 0:00–0:00 Connect Power and Conceal Wiring
- 0:12–0:15 Conceal and Finish
- 3:52–4:19 Organize and Conceal Wiring
How to Cut and Join LED Strip Lights Around Stair Corners
A high-level outline for installing LED strip lights around stair corners, focusing on cutting, joining, and mounting techniques.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

