Connect the LED Strips Using a Corner Connector
From How to Cut and Join LED Strip Lights Around Stair Corners · Step 4 of 7 · Video by MaviGadget

Showing 0:03–0:09 of the source video. Watch the full video with every moment.
What happens in this clip
Once the LED strip is cut, take an L-shaped LED strip corner connector. Carefully open the small, often transparent, clips on the connector. Align the exposed copper contacts on each cut end of the LED strip with the corresponding metal pins inside the connector. Gently slide each end of the LED strip into the connector, ensuring that the polarity markings (+ and -) on the strip match those on the connector. Once seated, close the clips firmly to secure the connection. The video demonstrates that once connected correctly, the light continuity is restored, and the LEDs around the corner light up seamlessly without interruption.
Goal: Create a seamless, illuminated 90-degree turn for the LED strip while maintaining light continuity.
What's used
Tools
- LED Strip Corner Connector (L-shaped)
- Flexible LED strip connector (with wires)
- LED Strip Light (cut)
About the full video
This project demonstrates the correct method for installing LED strip lights around a 90-degree corner, ensuring continuous illumination and preventing damage to the strip. It highlights common mistakes like bending or crushing the strip and provides the proper technique using a dedicated corner connector.
Step 4 of 7: Join LED Strips (if necessary)
If your stair layout requires connecting multiple LED strip segments end-to-end or at angles, use appropriate joining methods. **Soldering:** Apply a small amount of solder to the exposed copper pads on both the strip ends to be joined. Then, carefully bridge the pads with a soldering iron, ensuring a solid electrical connection. Use heat-shrink tubing to insulate and protect the soldered joint. **Solderless Connectors:** Slide the prepared ends of the LED strips into the corresponding channels of a solderless connector. Ensure the copper contacts align correctly with the connector's internal pins. Close the connector securely. For corner connections, use L-shaped connectors.
Every video in How to Cut and Join LED Strip Lights Around Stair Corners
Step 1: Plan LED Strip Layout
- 0:00–0:02 Plan and Gather Components
- 0:00–0:19 Install Flexible LED Strip Lighting
- 5:35–6:58 Plan Light Placement and Spacing
Step 2: Cut LED Strips to Length
- 0:02–0:07 Cut LED Strip to Length
- 0:09–2:00 Cut the LED Strip to Length
- 7:29–8:41 Measure and Cut the LED Strip
Step 3: Prepare LED Strip Ends for Connection
- 0:52–1:41 Prepare and Connect LED Strips
- 8:41–10:19 Attach Solderless Connectors
- 0:59–1:26 Prepare Strip Ends
Step 4: Join LED Strips (if necessary)
- 1:49–2:53 Connect Strip Sections
- 1:47–5:03 Connect LED Strips (Plug-and-Play or Soldering)
- 0:03–0:09 Connect the LED Strips Using a Corner Connector (this video)
Step 5: Mount LED Strips to Stairs
- 0:00–0:00 Adhere LED Strips to Stair Treads
- 0:10–0:12 Install LED Strips on Stair Treads
- 0:00–0:19 Install Flexible LED Strip Lighting
Step 6: Connect Power Supply and Test
- 3:03–3:19 Connect Power Supply and Test
- 0:09–0:12 Wiring and Power Connection
- 1:11–1:33 Power Up and Test
Step 7: Secure and Conceal Wiring
- 0:00–0:00 Connect Power and Conceal Wiring
- 0:12–0:15 Conceal and Finish
- 3:52–4:19 Organize and Conceal Wiring
How to Cut and Join LED Strip Lights Around Stair Corners
A high-level outline for installing LED strip lights around stair corners, focusing on cutting, joining, and mounting techniques.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

