Conceal and Finish
From How to Cut and Join LED Strip Lights Around Stair Corners · Step 7 of 7 · Video by WifiLampLED

Showing 0:12–0:15 of the source video. Watch the full video with every moment.
What happens in this clip
After confirming that the motion-activated stair lighting system operates perfectly to your satisfaction, proceed with the final aesthetic steps of concealment and tidying. Use cable ties, wire clips, or conduit to neatly bundle and secure any remaining visible wiring, preventing tripping hazards and contributing to a professional appearance. If not already completed, fully hide all electrical wires, the controller box, and the power supply unit. This can be achieved using decorative trim, specialized wire covers, or even by patching and painting over recessed wiring channels to seamlessly integrate them into the staircase and wall structure. Ensure that the motion sensors remain completely unobstructed and are not accidentally covered, as this would impair their functionality.
Goal: Achieve a clean, professional-looking installation.
What's used
Tools
- Cable Ties
- Velcro straps
- Conduit/Wire Covers
- Raceway molding
- Measuring Tape
- Utility Knife
- Wire Clips
- Adhesive wire guides
About the full video
This project guides you through installing motion-activated LED strip lighting on a staircase, creating a dynamic effect where each step illuminates sequentially as a person walks up or down. It involves precise planning, cutting and mounting LED strips, connecting them to an intelligent controller, integrating motion sensors for automated detection, and finally, concealing all wiring for a clean, professional finish.
Step 7 of 7: Secure and Conceal Wiring
Once the lights are working, neatly organize and secure all visible wires. Use cable ties, adhesive clips, or raceways to route wires along the underside of the stairs, behind walls, or in other discreet locations. Ensure wires are not pinched, stressed, or in a position where they could be tripped over or damaged. Carefully tuck away any excess wire. If power supply is external, ensure it is placed in a well-ventilated area and is accessible.
Every video in How to Cut and Join LED Strip Lights Around Stair Corners
Step 1: Plan LED Strip Layout
- 0:00–0:02 Plan and Gather Components
- 0:00–0:19 Install Flexible LED Strip Lighting
- 5:35–6:58 Plan Light Placement and Spacing
Step 2: Cut LED Strips to Length
- 0:02–0:07 Cut LED Strip to Length
- 0:09–2:00 Cut the LED Strip to Length
- 7:29–8:41 Measure and Cut the LED Strip
Step 3: Prepare LED Strip Ends for Connection
- 0:52–1:41 Prepare and Connect LED Strips
- 8:41–10:19 Attach Solderless Connectors
- 0:59–1:26 Prepare Strip Ends
Step 4: Join LED Strips (if necessary)
- 1:49–2:53 Connect Strip Sections
- 1:47–5:03 Connect LED Strips (Plug-and-Play or Soldering)
- 0:03–0:09 Connect the LED Strips Using a Corner Connector
Step 5: Mount LED Strips to Stairs
- 0:00–0:00 Adhere LED Strips to Stair Treads
- 0:10–0:12 Install LED Strips on Stair Treads
- 0:00–0:19 Install Flexible LED Strip Lighting
Step 6: Connect Power Supply and Test
- 3:03–3:19 Connect Power Supply and Test
- 0:09–0:12 Wiring and Power Connection
- 1:11–1:33 Power Up and Test
Step 7: Secure and Conceal Wiring
- 0:00–0:00 Connect Power and Conceal Wiring
- 0:12–0:15 Conceal and Finish (this video)
- 3:52–4:19 Organize and Conceal Wiring
How to Cut and Join LED Strip Lights Around Stair Corners
A high-level outline for installing LED strip lights around stair corners, focusing on cutting, joining, and mounting techniques.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

