powered by

Connect Strip Sections

From How to Cut and Join LED Strip Lights Around Stair Corners · Step 4 of 7 · Video by Lepro

Showing 1:49–2:53 of the source video. Watch the full video with every moment.

What happens in this clip

To join two strip light sections together in a straight line, use a connector clip. Push the open end of each strip into the connector clip, ensuring the copper pads align, then close the clip to lock it in place. To make your strip lights go around a corner, use one corner connector and two connector clips. Attach the end of each strip light section into each side of the corner connector using the clips. If you need to make your strip lights go over uneven surfaces, you can use a flexible strip connector. Connect a flexible strip connector to the strip lights and over the uneven area using two connector clips, one at each end, and then connect the other end of the flexible connector to the next section of lighting.

Goal: Join multiple strip light sections to navigate corners or uneven surfaces

What's used

Tools

  • Connector Clips Lepro
  • straight or with other connectors.
  • Corner Connector Lepro
  • Flexible Strip Connector Lepro
  • LED Strip Lights Lepro

About the full video

This project provides a comprehensive guide on how to install, cut, and connect LED strip lights to create beautiful mood lighting in any room or area. It covers surface preparation, adhering the lights, optional security clips, connecting power, cutting the strips, and using various connectors for turns and uneven surfaces.

Step 4 of 7: Join LED Strips (if necessary)

If your stair layout requires connecting multiple LED strip segments end-to-end or at angles, use appropriate joining methods. **Soldering:** Apply a small amount of solder to the exposed copper pads on both the strip ends to be joined. Then, carefully bridge the pads with a soldering iron, ensuring a solid electrical connection. Use heat-shrink tubing to insulate and protect the soldered joint. **Solderless Connectors:** Slide the prepared ends of the LED strips into the corresponding channels of a solderless connector. Ensure the copper contacts align correctly with the connector's internal pins. Close the connector securely. For corner connections, use L-shaped connectors.

Open this step in the guide

Every video in How to Cut and Join LED Strip Lights Around Stair Corners

  1. Step 1: Plan LED Strip Layout

  2. Step 2: Cut LED Strips to Length

  3. Step 3: Prepare LED Strip Ends for Connection

  4. Step 4: Join LED Strips (if necessary)

  5. Step 5: Mount LED Strips to Stairs

  6. Step 6: Connect Power Supply and Test

  7. Step 7: Secure and Conceal Wiring

How to Cut and Join LED Strip Lights Around Stair Corners

A high-level outline for installing LED strip lights around stair corners, focusing on cutting, joining, and mounting techniques.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Connect Strip Sections — How to Cut and Join LED Strip Lights Around Stair Corners | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.