Connect LED Strips (Plug-and-Play or Soldering)
From How to Cut and Join LED Strip Lights Around Stair Corners · Step 4 of 7 · Video by Chris Maher

Showing 1:47–5:03 of the source video. Watch the full video with every moment.
What happens in this clip
For connecting multiple LED strip sections, you have two main options: plug-and-play connectors or soldering. For plug-and-play, cut a strip at a cut point, insert each end of the LED strip into the transparent connector, and press down on the silver clamps with pliers to secure the connection. To connect two strips separated by a distance, insert the strip ends into the connector, then insert 18-gauge red and black wires into the other side of the connector and clamp them. For longer distances, you can extend these wires by cutting them in the middle, stripping all four ends, and using WAGO connectors to splice in additional lengths of 18-gauge silicone wires. Test the connections by temporarily plugging in the setup.
Goal: Connect individual LED strips for continuous lighting
What's used
Tools
- Helping Hands Unspecified
- Pliers (Needle-Nose) Unspecified
- Soldering Iron Unspecified
- Wire Strippers Unspecified
Materials
- 18 Gauge Silicone Wire (Red/Black) Unspecified
- COB LED Strip Unspecified
- Plug-and-Play Connectors Unspecified
- Solder Unspecified
- WAGO Connectors WAGO
- Soldering with heat shrink
About the full video
This project guides you through installing sleek and bright under-cabinet LED strip lighting in a kitchen. It covers selecting low-profile aluminum channels and high CRI COB LED strips, precise measurement and cutting, connecting LED strips using either plug-and-play connectors or soldering, and discreetly routing power and control wires for a clean, professional finish. The project includes options for dimming and various control methods.
Step 4 of 7: Join LED Strips (if necessary)
If your stair layout requires connecting multiple LED strip segments end-to-end or at angles, use appropriate joining methods. **Soldering:** Apply a small amount of solder to the exposed copper pads on both the strip ends to be joined. Then, carefully bridge the pads with a soldering iron, ensuring a solid electrical connection. Use heat-shrink tubing to insulate and protect the soldered joint. **Solderless Connectors:** Slide the prepared ends of the LED strips into the corresponding channels of a solderless connector. Ensure the copper contacts align correctly with the connector's internal pins. Close the connector securely. For corner connections, use L-shaped connectors.
Every video in How to Cut and Join LED Strip Lights Around Stair Corners
Step 1: Plan LED Strip Layout
- 0:00–0:02 Plan and Gather Components
- 0:00–0:19 Install Flexible LED Strip Lighting
- 5:35–6:58 Plan Light Placement and Spacing
Step 2: Cut LED Strips to Length
- 0:02–0:07 Cut LED Strip to Length
- 0:09–2:00 Cut the LED Strip to Length
- 7:29–8:41 Measure and Cut the LED Strip
Step 3: Prepare LED Strip Ends for Connection
- 0:52–1:41 Prepare and Connect LED Strips
- 8:41–10:19 Attach Solderless Connectors
- 0:59–1:26 Prepare Strip Ends
Step 4: Join LED Strips (if necessary)
- 1:49–2:53 Connect Strip Sections
- 1:47–5:03 Connect LED Strips (Plug-and-Play or Soldering) (this video)
- 0:03–0:09 Connect the LED Strips Using a Corner Connector
Step 5: Mount LED Strips to Stairs
- 0:00–0:00 Adhere LED Strips to Stair Treads
- 0:10–0:12 Install LED Strips on Stair Treads
- 0:00–0:19 Install Flexible LED Strip Lighting
Step 6: Connect Power Supply and Test
- 3:03–3:19 Connect Power Supply and Test
- 0:09–0:12 Wiring and Power Connection
- 1:11–1:33 Power Up and Test
Step 7: Secure and Conceal Wiring
- 0:00–0:00 Connect Power and Conceal Wiring
- 0:12–0:15 Conceal and Finish
- 3:52–4:19 Organize and Conceal Wiring
How to Cut and Join LED Strip Lights Around Stair Corners
A high-level outline for installing LED strip lights around stair corners, focusing on cutting, joining, and mounting techniques.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

