Install LED Strips on Stair Treads
From How to Cut and Join LED Strip Lights Around Stair Corners · Step 5 of 7 · Video by Smart Bright LEDs

Showing 0:10–0:12 of the source video. Watch the full video with every moment.
What happens in this clip
Carefully adhere each prepared LED strip to the underside of each stair tread. The video demonstrates applying the strips directly to the surface, ensuring they are straight and firmly pressed into place. This step will make the lighting discreetly illuminate the steps from below.
Goal: Affix LED strips to the underside of each stair tread.
What's used
Materials
- Prepared LED Strips Komigan
About the full video
This project provides detailed instructions on how to install a motion-activated LED lighting system for stairs, featuring individual LED strips for each step, motion sensors at the top and bottom of the staircase, a daylight sensor, and manual override switch panels. The system is controlled by a central intelligent motion sensor stair lighting controller and powered by a 12V DC power supply.
Step 5 of 7: Mount LED Strips to Stairs
Most LED strips come with an adhesive backing. Clean the surface of the stairs where the LED strip will be mounted with an appropriate cleaner (e.g., isopropyl alcohol) to ensure good adhesion. Carefully peel off the protective backing from the adhesive strip. Align the LED strip precisely along your marked path and press down firmly along its entire length. For enhanced security, especially on stairs, you can use additional mounting clips or a suitable adhesive.
Every video in How to Cut and Join LED Strip Lights Around Stair Corners
Step 1: Plan LED Strip Layout
- 0:00–0:02 Plan and Gather Components
- 0:00–0:19 Install Flexible LED Strip Lighting
- 5:35–6:58 Plan Light Placement and Spacing
Step 2: Cut LED Strips to Length
- 0:02–0:07 Cut LED Strip to Length
- 0:09–2:00 Cut the LED Strip to Length
- 7:29–8:41 Measure and Cut the LED Strip
Step 3: Prepare LED Strip Ends for Connection
- 0:52–1:41 Prepare and Connect LED Strips
- 8:41–10:19 Attach Solderless Connectors
- 0:59–1:26 Prepare Strip Ends
Step 4: Join LED Strips (if necessary)
- 1:49–2:53 Connect Strip Sections
- 1:47–5:03 Connect LED Strips (Plug-and-Play or Soldering)
- 0:03–0:09 Connect the LED Strips Using a Corner Connector
Step 5: Mount LED Strips to Stairs
- 0:00–0:00 Adhere LED Strips to Stair Treads
- 0:10–0:12 Install LED Strips on Stair Treads (this video)
- 0:00–0:19 Install Flexible LED Strip Lighting
Step 6: Connect Power Supply and Test
- 3:03–3:19 Connect Power Supply and Test
- 0:09–0:12 Wiring and Power Connection
- 1:11–1:33 Power Up and Test
Step 7: Secure and Conceal Wiring
- 0:00–0:00 Connect Power and Conceal Wiring
- 0:12–0:15 Conceal and Finish
- 3:52–4:19 Organize and Conceal Wiring
How to Cut and Join LED Strip Lights Around Stair Corners
A high-level outline for installing LED strip lights around stair corners, focusing on cutting, joining, and mounting techniques.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

