Install Flexible LED Strip Lighting
From How to Cut and Join LED Strip Lights Around Stair Corners · Step 1 of 7 · Video by Smart Bright LEDs

Showing 0:00–0:19 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by planning the route for the flexible LED strip lights along the underside of each stair tread. The video demonstrates routing the warm white LED strip horizontally along the back edge of the tread, then curving it downwards around the side of the riser, and continuing under the subsequent tread. This creates a continuous flow of light. Secure the LED strips to the wooden substructure of the treads and risers. This can be done using the adhesive backing typically found on LED strips, or for a more robust attachment, use small mounting clips. Ensure that any connecting wires are discreetly managed and hidden within the staircase structure, possibly by drilling small, circular cutouts or channels in the risers to allow the strips or wires to pass through without being seen. The goal is to achieve a clean, uninterrupted light line along the underside of the treads. Finally, connect the LED strips to a suitable LED power supply/driver and an optional dimmer/controller, ensuring all electrical connections are safe and insulated.
Goal: Secure LED strips to staircase treads and risers
What's used
Tools
- Drill
- Chisel (for square channels)
- Flexible LED Strip Lights
- Hardwired individual LED puck lights
- LED rope lights
- Hole Saw / Spade Bit
- Dremel tool with cutting bit
- LED Dimmer/Controller
- Standard toggle switch (for on/off only)
- LED Mounting Clips
- Strong silicone adhesive
- especially on curves or if adhesive fails.
- LED Power Supply/Driver
- LED Strip Connectors (solderless)
- Measuring Tape
- Yardstick
- Pencil
- Marker
- Screwdriver
- Small Screws
- Wood glue (for clips
- with clamps during drying)
- Soldering Iron and Solder
- Wire Cutters
Materials
- Electrical Tape
- Heat shrink tubing
- Electrical Wire
- Liquid electrical tape
About the full video
This project involves installing flexible LED strip lights beneath the treads of a staircase to create a modern, ambient lighting effect. The lights are carefully routed to follow the contours of the treads and risers, providing indirect illumination for safety and aesthetic appeal.
Step 1 of 7: Plan LED Strip Layout
Before cutting any LEDs or wires, carefully plan where each strip will be placed. Typically, this involves running the LED strip along the edge of each stair tread or riser. Mark the starting and ending points for each segment. Consider the location of the power supply and how the wires will be discreetly routed. Plan for any corner turns or transitions between steps. This planning phase is crucial for ensuring a clean and professional-looking installation and for calculating the correct amount of LED strip and wire needed.
Every video in How to Cut and Join LED Strip Lights Around Stair Corners
Step 1: Plan LED Strip Layout
- 0:00–0:02 Plan and Gather Components
- 0:00–0:19 Install Flexible LED Strip Lighting (this video)
- 5:35–6:58 Plan Light Placement and Spacing
Step 2: Cut LED Strips to Length
- 0:02–0:07 Cut LED Strip to Length
- 0:09–2:00 Cut the LED Strip to Length
- 7:29–8:41 Measure and Cut the LED Strip
Step 3: Prepare LED Strip Ends for Connection
- 0:52–1:41 Prepare and Connect LED Strips
- 8:41–10:19 Attach Solderless Connectors
- 0:59–1:26 Prepare Strip Ends
Step 4: Join LED Strips (if necessary)
- 1:49–2:53 Connect Strip Sections
- 1:47–5:03 Connect LED Strips (Plug-and-Play or Soldering)
- 0:03–0:09 Connect the LED Strips Using a Corner Connector
Step 5: Mount LED Strips to Stairs
- 0:00–0:00 Adhere LED Strips to Stair Treads
- 0:10–0:12 Install LED Strips on Stair Treads
- 0:00–0:19 Install Flexible LED Strip Lighting
Step 6: Connect Power Supply and Test
- 3:03–3:19 Connect Power Supply and Test
- 0:09–0:12 Wiring and Power Connection
- 1:11–1:33 Power Up and Test
Step 7: Secure and Conceal Wiring
- 0:00–0:00 Connect Power and Conceal Wiring
- 0:12–0:15 Conceal and Finish
- 3:52–4:19 Organize and Conceal Wiring
How to Cut and Join LED Strip Lights Around Stair Corners
A high-level outline for installing LED strip lights around stair corners, focusing on cutting, joining, and mounting techniques.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

