How to Install Carpet Treads on High-Gloss Polyurethane Stairs
About This Guide
This project outlines the steps for installing carpet treads on high-gloss polyurethane stairs to improve traction and reduce wear.
Tools & Materials
Emsco 23 in. Plastic Handle and 6 in. Plastic Blade - Deluxe Snow Brush and Ice Scraper 1716-1
Nance Carpet and Rug Peel and Stick Charcoal 8 in. x 18 in. Stair Tread Cover (Set of 13) 17668
Emsco 23 in. Plastic Handle and 6 in. Plastic Blade - Deluxe Snow Brush and Ice Scraper 1716-1
Nance Carpet and Rug Peel and Stick Charcoal 8 in. x 18 in. Stair Tread Cover (Set of 13) 17668
Steps
Clean Stair Treads
Using a degreaser and a clean cloth, meticulously clean the surface of each high-gloss polyurethane stair tread. This step is crucial for ensuring proper adhesion of the carpet treads. Pay close attention to any corners or edges where dirt might accumulate. Allow the treads to dry completely before proceeding.
Dry Fit Carpet Treads
Before removing any backing, carefully place each carpet tread onto its designated stair tread. Ensure that the tread is centered, with an even overhang (if applicable) on the sides and a consistent gap at the nosing of the stair. This dry fit allows for adjustments before permanent attachment and helps visualize the final look.
Apply Adhesive (if necessary)
If your carpet treads do not come with pre-applied adhesive, apply a strong, multi-surface adhesive specifically designed for fabric and wood or polyurethane surfaces. Follow the adhesive manufacturer's instructions regarding application method (e.g., thin, even coat) and any required drying or tacking time. Ensure consistent coverage.
Install Carpet Tread
Starting from the nosing of the stair tread, carefully peel away the protective backing from the carpet tread's adhesive. Align the tread with your previously determined dry-fit position. Press the tread down firmly, working from the back edge towards the front nosing, ensuring there are no air bubbles and that the tread is fully adhered to the stair surface.
Secure Edges and Nosing
Pay special attention to the edges and the nosing of each installed carpet tread. Press down firmly along these areas to ensure a strong bond. If any part of the edge seems loose, apply additional pressure or a small amount of appropriate adhesive specifically to the edge and press it down.
Questions about your project or which product fits? Oak Valley Designs's team is happy to help. Mon–Fri 9–5 ET





