Prepare and Clean Stair Treads
From How to Install Carpet Treads on High-Gloss Polyurethane Stairs · Step 1 of 5 · Video by Oak Valley Designs

Showing 0:09–0:45 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by thoroughly cleaning the stair treads. You can use a microfiber cloth or any suitable cloth, optionally combined with a handheld vacuum, to remove all dust and loose dirt. The goal is to ensure the entire stair surface is clean and completely dry. This is crucial for the adhesive on the back of the carpet treads to stick properly. Avoid using any cleaning products that might leave a greasy residue, such as Pledge or Pine-Sol, as this can compromise the adhesive bond.
Goal: Clean the entire surface of each stair tread to remove all dust and loose dirt, ensuring it is nice and dry for optimal adhesive bonding.
What's used
Tools
- Handheld vacuum
- Microfiber cloth
About the full video
This project provides step-by-step instructions for easily installing carpet treads onto stairs using strong adhesive tape. It covers preparing the stairs by cleaning them, marking alignment with painter's tape, and then securely attaching the self-adhesive carpet treads for a secure and streamlined look.
What's said in this clip
Hi everyone, it's Amy with Oak Valley Designs. I'm going to talk to you about cleaning your stairs in preparation for your new carpet stair treads. So, you can grab a microfiber cloth or any cloth really works. You can do a handheld vacuum or you can use both. And what I like to do is simply take the cloth, make sure you're wiping the entire stair tread, get all of the dust, all of the loose dirt off of here. And the idea is to keep it nice and dry so that the adhesive on the back of your stair tread will really stick nicely. Try to avoid using anything that'll make it greasy, like pledge or pine saw. And that's all
Automatically transcribed from the source video.
Step 1 of 5: Clean Stair Treads
Using a degreaser and a clean cloth, meticulously clean the surface of each high-gloss polyurethane stair tread. This step is crucial for ensuring proper adhesion of the carpet treads. Pay close attention to any corners or edges where dirt might accumulate. Allow the treads to dry completely before proceeding.
Every video in How to Install Carpet Treads on High-Gloss Polyurethane Stairs
Step 1: Clean Stair Treads
- 0:18–0:31 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads (this video)
- 0:34–0:40 Clean the Stairs
Step 2: Dry Fit Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 0:06–0:14 Install Carpet Treads
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 3: Apply Adhesive (if necessary)
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:04–0:08 Apply Spray Adhesive
Step 4: Install Carpet Tread
- 0:04–0:06 Install Carpet Treads
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 5: Secure Edges and Nosing
- 3:25–4:32 Secure Treads to Stairs
- 0:21–0:26 Press Down Firmly
- 4:16–5:03 Tuck and Staple Carpet Edges
How to Install Carpet Treads on High-Gloss Polyurethane Stairs
This project outlines the steps for installing carpet treads on high-gloss polyurethane stairs to improve traction and reduce wear.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

