Clean the Stairs
From How to Install Carpet Treads on High-Gloss Polyurethane Stairs · Step 1 of 5 · Video by Slips Away UK

Showing 0:18–0:31 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by ensuring your stairs are thoroughly clean. Use a dust pan and brush to sweep away all dirt, dust, and debris from top to bottom. Follow up by wiping down the surface of each stair with a damp rag to remove any lingering unwanted stains or marks. This critical step ensures optimal adhesion for the anti-slip treads.
Goal: Ensure stairs are clean and free of dirt, debris, stains, and marks.
What's used
Tools
- Damp rag
- Sponge
- Dust pan and brush
- Broom
About the full video
This video provides step-by-step instructions on how to easily install anti-slip stair treads on hardwood stairs, covering essential preparation, precise measurement for alignment, and proper application techniques to ensure a secure and bubble-free finish.
Step 1 of 5: Clean Stair Treads
Using a degreaser and a clean cloth, meticulously clean the surface of each high-gloss polyurethane stair tread. This step is crucial for ensuring proper adhesion of the carpet treads. Pay close attention to any corners or edges where dirt might accumulate. Allow the treads to dry completely before proceeding.
Every video in How to Install Carpet Treads on High-Gloss Polyurethane Stairs
Step 1: Clean Stair Treads
- 0:18–0:31 Clean the Stairs (this video)
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:34–0:40 Clean the Stairs
Step 2: Dry Fit Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 0:06–0:14 Install Carpet Treads
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 3: Apply Adhesive (if necessary)
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:04–0:08 Apply Spray Adhesive
Step 4: Install Carpet Tread
- 0:04–0:06 Install Carpet Treads
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 5: Secure Edges and Nosing
- 3:25–4:32 Secure Treads to Stairs
- 0:21–0:26 Press Down Firmly
- 4:16–5:03 Tuck and Staple Carpet Edges
How to Install Carpet Treads on High-Gloss Polyurethane Stairs
This project outlines the steps for installing carpet treads on high-gloss polyurethane stairs to improve traction and reduce wear.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

