powered by

Install Carpet Treads

From How to Install Carpet Treads on High-Gloss Polyurethane Stairs · Step 4 of 5 · Video by Oak Valley Designs

Showing 0:04–0:06 of the source video. Watch the full video with every moment.

What happens in this clip

Starting from the bottom stair, carefully align the first carpet tread according to your predetermined placement (e.g., centered, with a consistent gap from the sides and front edge). Press down firmly, working from the center outwards, to ensure good contact between the adhesive and the stair surface. Apply pressure evenly across the entire surface of the tread. Repeat this process for each subsequent stair, moving upwards. Take your time to ensure each tread is straight and securely adhered. For added security, you can use a small roller or your hands to press down on the entire surface of each tread after placement. The video shows the Golden Retriever comfortably using the stairs, indicating the treads are securely installed.

Goal: Securely attach all carpet treads to the stairs.

What's used

Tools

  • Carpet Stair Treads (prepared)
  • Small Roller
  • even pressure to secure treads.

About the full video

This DIY project provides a comprehensive guide to installing carpet treads on existing stairs. The goal is to enhance safety and comfort, particularly for pets like dogs, by providing increased traction and cushioning. The process involves preparing the stairs, selecting appropriate treads, and securely attaching them, resulting in a more pet-friendly and aesthetically pleasing staircase.

Step 4 of 5: Install Carpet Tread

Starting from the nosing of the stair tread, carefully peel away the protective backing from the carpet tread's adhesive. Align the tread with your previously determined dry-fit position. Press the tread down firmly, working from the back edge towards the front nosing, ensuring there are no air bubbles and that the tread is fully adhered to the stair surface.

Open this step in the guide

Every video in How to Install Carpet Treads on High-Gloss Polyurethane Stairs

  1. Step 1: Clean Stair Treads

  2. Step 2: Dry Fit Carpet Treads

  3. Step 3: Apply Adhesive (if necessary)

  4. Step 4: Install Carpet Tread

  5. Step 5: Secure Edges and Nosing

How to Install Carpet Treads on High-Gloss Polyurethane Stairs

This project outlines the steps for installing carpet treads on high-gloss polyurethane stairs to improve traction and reduce wear.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Install Carpet Treads — How to Install Carpet Treads on High-Gloss Polyurethane Stairs | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.