Press Down Firmly
From How to Install Carpet Treads on High-Gloss Polyurethane Stairs · Step 5 of 5 · Video by Dean Stair Treads

Showing 0:21–0:26 of the source video. Watch the full video with every moment.
What happens in this clip
With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.
Goal: Ensure strong and complete adhesion of the stair tread
What's used
Materials
- Self-adhesive Carpet Stair Tread
About the full video
This project demonstrates how to easily install self-adhesive carpet stair treads onto wooden stairs. The process involves peeling off the protective backing from the adhesive strips, carefully positioning the tread on the stair, and then pressing it firmly to ensure secure attachment.
Step 5 of 5: Secure Edges and Nosing
Pay special attention to the edges and the nosing of each installed carpet tread. Press down firmly along these areas to ensure a strong bond. If any part of the edge seems loose, apply additional pressure or a small amount of appropriate adhesive specifically to the edge and press it down.
Every video in How to Install Carpet Treads on High-Gloss Polyurethane Stairs
Step 1: Clean Stair Treads
- 0:18–0:31 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:34–0:40 Clean the Stairs
Step 2: Dry Fit Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 0:06–0:14 Install Carpet Treads
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 3: Apply Adhesive (if necessary)
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:04–0:08 Apply Spray Adhesive
Step 4: Install Carpet Tread
- 0:04–0:06 Install Carpet Treads
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 5: Secure Edges and Nosing
- 3:25–4:32 Secure Treads to Stairs
- 0:21–0:26 Press Down Firmly (this video)
- 4:16–5:03 Tuck and Staple Carpet Edges
How to Install Carpet Treads on High-Gloss Polyurethane Stairs
This project outlines the steps for installing carpet treads on high-gloss polyurethane stairs to improve traction and reduce wear.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

