Apply Peel-and-Stick Carpet Treads
From How to Install Carpet Treads on High-Gloss Polyurethane Stairs · Step 2 of 5 · Video by Oak Valley Designs

Showing 0:16–0:21 of the source video. Watch the full video with every moment.
What happens in this clip
With the guide lines in place, take each carpet stair tread, peel off its protective backing to reveal the adhesive, and carefully position it onto the stair, aligning it precisely with the blue painter's tape guides. Press down firmly across the entire surface of the tread to ensure strong adhesion. Repeat this process for all stairs.
Goal: Securely attach carpet treads to each stair
What's used
Materials
- Oak Valley Designs Carpet Stair Treads Oak Valley Designs
About the full video
This project involves installing peel-and-stick carpet stair treads on wooden stairs to improve safety, comfort, and aesthetics. The process includes unboxing the treads, measuring and marking the stairs for consistent placement, and then applying each tread.
Step 2 of 5: Dry Fit Carpet Treads
Before removing any backing, carefully place each carpet tread onto its designated stair tread. Ensure that the tread is centered, with an even overhang (if applicable) on the sides and a consistent gap at the nosing of the stair. This dry fit allows for adjustments before permanent attachment and helps visualize the final look.
Every video in How to Install Carpet Treads on High-Gloss Polyurethane Stairs
Step 1: Clean Stair Treads
- 0:18–0:31 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:34–0:40 Clean the Stairs
Step 2: Dry Fit Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 0:06–0:14 Install Carpet Treads
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads (this video)
Step 3: Apply Adhesive (if necessary)
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:04–0:08 Apply Spray Adhesive
Step 4: Install Carpet Tread
- 0:04–0:06 Install Carpet Treads
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 5: Secure Edges and Nosing
- 3:25–4:32 Secure Treads to Stairs
- 0:21–0:26 Press Down Firmly
- 4:16–5:03 Tuck and Staple Carpet Edges
How to Install Carpet Treads on High-Gloss Polyurethane Stairs
This project outlines the steps for installing carpet treads on high-gloss polyurethane stairs to improve traction and reduce wear.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

