Tuck and Staple Carpet Edges
From How to Install Carpet Treads on High-Gloss Polyurethane Stairs · Step 5 of 5 · Video by Direct Carpet

Showing 4:16–5:03 of the source video. Watch the full video with every moment.
What happens in this clip
After kicking the carpet into place, use a stair tool and a hammer to tuck the carpet tightly into the crease where the tread meets the riser and where it meets the skirting board. This creates a clean, finished edge. Then, use an electric tacker (staple gun) to further secure the carpet, particularly along the underside of the nosing and any loose edges. This provides additional reinforcement and prevents the carpet from lifting.
Goal: Finalize carpet installation with clean edges and secure fastening
What's used
Tools
- Electric Tacker Roberts
- Hammer DeWalt
- Stair Tool
- Staples Duo Fast Gold
About the full video
This DIY project provides a detailed guide on how to install carpet on a staircase, covering all necessary steps from preparing the stairs with tack strips and underlay to precisely cutting and securing the carpet. The process involves measuring, cutting, stapling, stretching, and tucking the carpet for a professional finish.
Step 5 of 5: Secure Edges and Nosing
Pay special attention to the edges and the nosing of each installed carpet tread. Press down firmly along these areas to ensure a strong bond. If any part of the edge seems loose, apply additional pressure or a small amount of appropriate adhesive specifically to the edge and press it down.
Every video in How to Install Carpet Treads on High-Gloss Polyurethane Stairs
Step 1: Clean Stair Treads
- 0:18–0:31 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:34–0:40 Clean the Stairs
Step 2: Dry Fit Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 0:06–0:14 Install Carpet Treads
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 3: Apply Adhesive (if necessary)
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:04–0:08 Apply Spray Adhesive
Step 4: Install Carpet Tread
- 0:04–0:06 Install Carpet Treads
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 5: Secure Edges and Nosing
- 3:25–4:32 Secure Treads to Stairs
- 0:21–0:26 Press Down Firmly
- 4:16–5:03 Tuck and Staple Carpet Edges (this video)
How to Install Carpet Treads on High-Gloss Polyurethane Stairs
This project outlines the steps for installing carpet treads on high-gloss polyurethane stairs to improve traction and reduce wear.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

