Install Carpet Treads
From How to Install Carpet Treads on High-Gloss Polyurethane Stairs · Step 2 of 5 · Video by Oak Valley Designs

Showing 0:06–0:14 of the source video. Watch the full video with every moment.
What happens in this clip
With the tape guidelines in place, begin installing the carpet stair treads. Carefully align the first carpet tread with the tape marks on the bottom stair. Once correctly positioned, firmly press the tread down onto the wooden surface, ensuring the non-slip backing makes full contact. Work your way up the staircase, repeating the process for each subsequent stair, aligning each tread with its corresponding tape guide and pressing it down securely.
Goal: Securely attach each carpet tread to the stairs.
What's used
Tools
- Carpet Stair Treads
About the full video
This project details the process of installing individual carpet stair treads on a wooden staircase. The process involves preparing the stairs by marking precise placement with painter's tape, then carefully adhering pre-made carpet treads, which often come with non-slip backing, to each stair. This DIY enhances safety by providing traction and can reduce noise on wooden stairs.
Step 2 of 5: Dry Fit Carpet Treads
Before removing any backing, carefully place each carpet tread onto its designated stair tread. Ensure that the tread is centered, with an even overhang (if applicable) on the sides and a consistent gap at the nosing of the stair. This dry fit allows for adjustments before permanent attachment and helps visualize the final look.
Every video in How to Install Carpet Treads on High-Gloss Polyurethane Stairs
Step 1: Clean Stair Treads
- 0:18–0:31 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:34–0:40 Clean the Stairs
Step 2: Dry Fit Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 0:06–0:14 Install Carpet Treads (this video)
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 3: Apply Adhesive (if necessary)
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:04–0:08 Apply Spray Adhesive
Step 4: Install Carpet Tread
- 0:04–0:06 Install Carpet Treads
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 5: Secure Edges and Nosing
- 3:25–4:32 Secure Treads to Stairs
- 0:21–0:26 Press Down Firmly
- 4:16–5:03 Tuck and Staple Carpet Edges
How to Install Carpet Treads on High-Gloss Polyurethane Stairs
This project outlines the steps for installing carpet treads on high-gloss polyurethane stairs to improve traction and reduce wear.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

