Clean the Stairs
From How to Install Carpet Treads on High-Gloss Polyurethane Stairs · Step 1 of 5 · Video by Oak Valley Designs

Showing 0:34–0:40 of the source video. Watch the full video with every moment.
What happens in this clip
Before installing the stair treads, ensure the stairs are thoroughly clean. Use a vacuum cleaner to remove any dust, dirt, pet hair, or debris from the surface of each stair. A clean surface is crucial for the adhesive on the treads to bond properly.
Goal: Prepare the stair surface for tread installation.
What's used
Tools
- Vacuum Cleaner
- Broom and dustpan
About the full video
This project guides you through installing carpeted stair treads to enhance safety and prevent slips on hardwood stairs, particularly when there are young children or pets in the home. The process involves thorough cleaning of the stairs, precise measurement and marking for consistent tread placement, and secure application of the adhesive-backed treads.
Step 1 of 5: Clean Stair Treads
Using a degreaser and a clean cloth, meticulously clean the surface of each high-gloss polyurethane stair tread. This step is crucial for ensuring proper adhesion of the carpet treads. Pay close attention to any corners or edges where dirt might accumulate. Allow the treads to dry completely before proceeding.
Every video in How to Install Carpet Treads on High-Gloss Polyurethane Stairs
Step 1: Clean Stair Treads
- 0:18–0:31 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:34–0:40 Clean the Stairs (this video)
Step 2: Dry Fit Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 0:06–0:14 Install Carpet Treads
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 3: Apply Adhesive (if necessary)
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:04–0:08 Apply Spray Adhesive
Step 4: Install Carpet Tread
- 0:04–0:06 Install Carpet Treads
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 5: Secure Edges and Nosing
- 3:25–4:32 Secure Treads to Stairs
- 0:21–0:26 Press Down Firmly
- 4:16–5:03 Tuck and Staple Carpet Edges
How to Install Carpet Treads on High-Gloss Polyurethane Stairs
This project outlines the steps for installing carpet treads on high-gloss polyurethane stairs to improve traction and reduce wear.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

