Install Carpet Treads
From How to Install Carpet Treads on High-Gloss Polyurethane Stairs · Step 2 of 5 · Video by Oak Valley Designs

Showing 0:04–0:06 of the source video. Watch the full video with every moment.
What happens in this clip
Starting from the bottom stair, carefully align the first carpet tread according to your predetermined placement (e.g., centered, with a consistent gap from the sides and front edge). Press down firmly, working from the center outwards, to ensure good contact between the adhesive and the stair surface. Apply pressure evenly across the entire surface of the tread. Repeat this process for each subsequent stair, moving upwards. Take your time to ensure each tread is straight and securely adhered. For added security, you can use a small roller or your hands to press down on the entire surface of each tread after placement. The video shows the Golden Retriever comfortably using the stairs, indicating the treads are securely installed.
Goal: Securely attach all carpet treads to the stairs.
What's used
Tools
- Carpet Stair Treads (prepared)
- Small Roller
- even pressure to secure treads.
About the full video
This DIY project provides a comprehensive guide to installing carpet treads on existing stairs. The goal is to enhance safety and comfort, particularly for pets like dogs, by providing increased traction and cushioning. The process involves preparing the stairs, selecting appropriate treads, and securely attaching them, resulting in a more pet-friendly and aesthetically pleasing staircase.
Step 2 of 5: Dry Fit Carpet Treads
Before removing any backing, carefully place each carpet tread onto its designated stair tread. Ensure that the tread is centered, with an even overhang (if applicable) on the sides and a consistent gap at the nosing of the stair. This dry fit allows for adjustments before permanent attachment and helps visualize the final look.
Every video in How to Install Carpet Treads on High-Gloss Polyurethane Stairs
Step 1: Clean Stair Treads
- 0:18–0:31 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:34–0:40 Clean the Stairs
Step 2: Dry Fit Carpet Treads
- 0:04–0:06 Install Carpet Treads (this video)
- 0:06–0:14 Install Carpet Treads
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 3: Apply Adhesive (if necessary)
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:04–0:08 Apply Spray Adhesive
Step 4: Install Carpet Tread
- 0:04–0:06 Install Carpet Treads
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 5: Secure Edges and Nosing
- 3:25–4:32 Secure Treads to Stairs
- 0:21–0:26 Press Down Firmly
- 4:16–5:03 Tuck and Staple Carpet Edges
How to Install Carpet Treads on High-Gloss Polyurethane Stairs
This project outlines the steps for installing carpet treads on high-gloss polyurethane stairs to improve traction and reduce wear.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

