Apply Carpet Adhesive to Stairs
From How to Install Carpet Treads on High-Gloss Polyurethane Stairs · Step 3 of 5 · Video by Fantum Karpets

Showing 0:34–0:46 of the source video. Watch the full video with every moment.
What happens in this clip
Prepare the carpet adhesive by stirring it thoroughly. Use a small piece of scrap cardboard or a protective sheet to shield the wall and any already carpeted areas from excess adhesive. Using a specialized adhesive spreader (trowel) with appropriate notched teeth, apply a generous and even layer of carpet adhesive to the surface of the stair tread and riser you are currently working on. Ensure the entire area to be covered by carpet is coated with adhesive for optimal bonding. The notched trowel helps create ridges in the adhesive, which promotes stronger adhesion and proper curing.
Goal: Prepare stair surfaces for carpet adhesion
What's used
Tools
- Richard 9" Adhesive Spreader Richard
Materials
- Cardboard (scrap)
- Carpet Adhesive
About the full video
This project provides a detailed guide on how to install carpet on wooden stairs, covering essential steps from precise measurement and carpet cutting to adhesive application, careful laying, and securing the carpet with staples and trimming for a professional finish. It demonstrates techniques for handling various stair shapes and ensuring a durable and aesthetically pleasing result.
Step 3 of 5: Apply Adhesive (if necessary)
If your carpet treads do not come with pre-applied adhesive, apply a strong, multi-surface adhesive specifically designed for fabric and wood or polyurethane surfaces. Follow the adhesive manufacturer's instructions regarding application method (e.g., thin, even coat) and any required drying or tacking time. Ensure consistent coverage.
Every video in How to Install Carpet Treads on High-Gloss Polyurethane Stairs
Step 1: Clean Stair Treads
- 0:18–0:31 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:34–0:40 Clean the Stairs
Step 2: Dry Fit Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 0:06–0:14 Install Carpet Treads
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 3: Apply Adhesive (if necessary)
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs (this video)
- 0:04–0:08 Apply Spray Adhesive
Step 4: Install Carpet Tread
- 0:04–0:06 Install Carpet Treads
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 5: Secure Edges and Nosing
- 3:25–4:32 Secure Treads to Stairs
- 0:21–0:26 Press Down Firmly
- 4:16–5:03 Tuck and Staple Carpet Edges
How to Install Carpet Treads on High-Gloss Polyurethane Stairs
This project outlines the steps for installing carpet treads on high-gloss polyurethane stairs to improve traction and reduce wear.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

