Position the Gate Frame in Opening
From How to Install a Pressure-Mounted Gate at the Bottom of Stairs · Step 1 of 6 · Video by FairyBaby

Showing 0:04–0:06 of the source video. Watch the full video with every moment.
What happens in this clip
Carefully position the main gate frame within the desired opening. In this video, it's installed at the bottom of a stairwell. Ensure the gate is centered horizontally within the opening and that the bottom bar sits flush with the floor or step. The gate may appear slightly narrower than the opening at this stage, which is normal as the pressure mounts will extend to fill the gap.
Goal: Place the main gate frame into the desired opening, such as a doorway or stairwell, ensuring it is centered and generally level.
What's used
Tools
- Pet Gate Assembly
About the full video
This video demonstrates the quick and easy installation of a pressure-mounted pet gate, specifically a Fairybaby "Narrow Spacing Gate," in a stairwell opening. The process involves positioning the gate, adjusting the pressure bolts to secure it, and testing the latch mechanism for pet containment.
Step 1 of 6: Choose Gate Location
Identify the ideal spot for the gate installation at the base of the stairs. This location should offer a flat and stable surface on both sides to properly seat the pressure-mounted posts. Avoid areas with significant floor molding or uneven surfaces that could compromise the gate's stability.
Every video in How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Step 1: Choose Gate Location
- 0:30–0:56 Install Gate (Pressure Mounting)
- 0:04–0:06 Position the Gate Frame in Opening (this video)
- 1:32–1:39 Position Gate in Opening
Step 2: Assemble Gate Components
- 0:27–1:10 Assemble Gate Frame and Door
- 0:56–1:19 Install Gate Door and Optional Extensions
- 0:28–0:56 Measure Opening and Assemble Gate Frame
Step 3: Install Pressure-Mount Posts
- 0:15–0:31 Install the Gate Using Pressure Mount
- 0:25–0:32 Attach Pressure Mounts to Gate
- 1:31–1:52 Pressure Mount the Child Safety Gate
Step 4: Position Gate and Adjust Height
- 0:04–0:06 Position the Gate Frame in Opening
- 0:32–1:06 Position Gate and Check Initial Gap
- 0:05–0:08 Position and Secure the Gate
Step 5: Apply Pressure and Secure
- 1:27–1:39 Tighten Spindle Rods for Secure Installation
- 0:06–0:09 Adjust and Secure Pressure Mounts
- 0:54–1:14 Finalize Tension and Security Check
Step 6: Test Gate Operation and Stability
- 1:51–1:59 Test Gate Operation
- 1:11–1:59 Verify Gate Functionality and Safety
- 3:05–3:19 Test Gate Operation and SecurTech Lock
Questions about How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Is a pressure-mounted gate truly safe for the bottom of stairs, and what are the main safety considerations?
Yes, pressure-mounted gates are suitable for the bottom of stairs, but their security relies entirely on proper installation. Always ensure the gate is installed perfectly level and the pressure mounts are tightened firmly against stable surfaces. Never use a pressure-mounted gate at the top of stairs, as a fall risk is too high if it were to dislodge.
What specific tools and additional materials might I need beyond the gate itself?
You'll definitely need a level to ensure proper alignment, and potentially a screwdriver or wrench for any assembly or fine-tuning of the pressure rods. If your staircase opening is wider than the standard gate, you'll also need to purchase a compatible gate extension kit to bridge the gap safely.
What are the most common installation mistakes beginners make, and how can I avoid them?
A frequent mistake is insufficient tightening of the pressure rods, which makes the gate unstable. Another is not using a level, leading to a crooked gate that might not latch properly. Always double-check tightness and gate alignment, and give the gate a firm push to test its security after installation.
My newly installed gate feels wobbly or doesn't seem secure; how can I troubleshoot this?
First, ensure all four pressure points are making solid, even contact with the walls or banisters and are tightened equally. If wobbling persists, check if your gate came with wall cups or adhesive pads, as these can provide a more grippy and stable surface for the pressure points. Re-adjust and tighten until it feels solid.
How long should this project take for someone with no DIY experience, and is it difficult?
This project is rated as beginner difficulty and should realistically take about 30 minutes to an hour. The estimated 2 hours in the project context likely accounts for unpacking, reading instructions thoroughly, and any minor adjustments. It's mainly about assembling parts and adjusting tension, making it quite straightforward.
What should I do if my stair opening is too wide for the standard pressure-mounted gate?
If your opening is wider than the gate's maximum extension, you'll need to purchase an extension kit specifically designed for your gate model. Measure the opening accurately before buying the gate, and ensure you get the correct number and size of extensions to achieve a snug and safe fit.
How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Outline for installing a pressure-mounted safety gate at the bottom of stairs to prevent unauthorized access, particularly for children or pets.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

