Install the Gate Using Pressure Mount
From How to Install a Pressure-Mounted Gate at the Bottom of Stairs · Step 3 of 6 · Video by TTPM Baby Gear Reviews

Showing 0:15–0:31 of the source video. Watch the full video with every moment.
What happens in this clip
To install the gate, begin by inserting the pressure mount adjustment screws into the frame of the gate. The video demonstrates using the pressure mount method. Utilize the detachable panel to help gauge the width of your doorway and ensure a perfect fit. Position the gate within the door opening and extend the pressure mounts by twisting them until the gate is solidly and securely in place against the door frame. Ensure the gate feels firm and does not wobble.
Goal: Securely install the gate in a doorway using pressure mounting.
What's used
Tools
- Detachable Panel Regalo
- Doorway
- Pressure Mount Adjustment Screws Regalo
- Regalo Easy Step Safety Gate Regalo
About the full video
This project guides you through the installation and operation of the Regalo Easy Step Safety Gate, designed to keep babies and pets safe in your home. The gate can be installed using either pressure mounts or wall mounts and features an easy-swing gate for convenient access.
Step 3 of 6: Install Pressure-Mount Posts
Locate the pressure-mount posts or pads that came with your gate. These typically screw into the side of the gate frame or attach via specific hardware. Ensure they are firmly attached and oriented correctly to press against the wall or stair banister.
Every video in How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Step 1: Choose Gate Location
- 0:30–0:56 Install Gate (Pressure Mounting)
- 0:04–0:06 Position the Gate Frame in Opening
- 1:32–1:39 Position Gate in Opening
Step 2: Assemble Gate Components
- 0:27–1:10 Assemble Gate Frame and Door
- 0:56–1:19 Install Gate Door and Optional Extensions
- 0:28–0:56 Measure Opening and Assemble Gate Frame
Step 3: Install Pressure-Mount Posts
- 0:15–0:31 Install the Gate Using Pressure Mount (this video)
- 0:25–0:32 Attach Pressure Mounts to Gate
- 1:31–1:52 Pressure Mount the Child Safety Gate
Step 4: Position Gate and Adjust Height
- 0:04–0:06 Position the Gate Frame in Opening
- 0:32–1:06 Position Gate and Check Initial Gap
- 0:05–0:08 Position and Secure the Gate
Step 5: Apply Pressure and Secure
- 1:27–1:39 Tighten Spindle Rods for Secure Installation
- 0:06–0:09 Adjust and Secure Pressure Mounts
- 0:54–1:14 Finalize Tension and Security Check
Step 6: Test Gate Operation and Stability
- 1:51–1:59 Test Gate Operation
- 1:11–1:59 Verify Gate Functionality and Safety
- 3:05–3:19 Test Gate Operation and SecurTech Lock
How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Outline for installing a pressure-mounted safety gate at the bottom of stairs to prevent unauthorized access, particularly for children or pets.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

