Attach Pressure Mounts to Gate
From How to Install a Pressure-Mounted Gate at the Bottom of Stairs · Step 3 of 6 · Video by Safety 1st Europe

Showing 0:25–0:32 of the source video. Watch the full video with every moment.
What happens in this clip
Before positioning the gate in the doorway, attach the four pressure-fit screws with their circular mounting cups to each corner of the gate. Gently twist each screw into its designated hole on the gate frame. Only thread them in enough to secure the circular mounting cup firmly onto the gate, leaving plenty of thread exposed for later adjustment.
Goal: Prepare the gate for installation by securing the pressure mounts.
What's used
Tools
- Pressure-Fit Screws with Mounting Cups
- Safety 1st Easy Close Metal Baby Gate Safety 1st
About the full video
This project provides a comprehensive guide on how to properly install a Safety 1st Easy Close Metal pressure-fit baby gate. It covers measuring the doorway, assembling the gate, tightening the pressure mounts, verifying correct alignment and latch function, and using optional extensions for wider openings.
Step 3 of 6: Install Pressure-Mount Posts
Locate the pressure-mount posts or pads that came with your gate. These typically screw into the side of the gate frame or attach via specific hardware. Ensure they are firmly attached and oriented correctly to press against the wall or stair banister.
Every video in How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Step 1: Choose Gate Location
- 0:30–0:56 Install Gate (Pressure Mounting)
- 0:04–0:06 Position the Gate Frame in Opening
- 1:32–1:39 Position Gate in Opening
Step 2: Assemble Gate Components
- 0:27–1:10 Assemble Gate Frame and Door
- 0:56–1:19 Install Gate Door and Optional Extensions
- 0:28–0:56 Measure Opening and Assemble Gate Frame
Step 3: Install Pressure-Mount Posts
- 0:15–0:31 Install the Gate Using Pressure Mount
- 0:25–0:32 Attach Pressure Mounts to Gate (this video)
- 1:31–1:52 Pressure Mount the Child Safety Gate
Step 4: Position Gate and Adjust Height
- 0:04–0:06 Position the Gate Frame in Opening
- 0:32–1:06 Position Gate and Check Initial Gap
- 0:05–0:08 Position and Secure the Gate
Step 5: Apply Pressure and Secure
- 1:27–1:39 Tighten Spindle Rods for Secure Installation
- 0:06–0:09 Adjust and Secure Pressure Mounts
- 0:54–1:14 Finalize Tension and Security Check
Step 6: Test Gate Operation and Stability
- 1:51–1:59 Test Gate Operation
- 1:11–1:59 Verify Gate Functionality and Safety
- 3:05–3:19 Test Gate Operation and SecurTech Lock
How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Outline for installing a pressure-mounted safety gate at the bottom of stairs to prevent unauthorized access, particularly for children or pets.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

