Adjust and Secure Pressure Mounts
From How to Install a Pressure-Mounted Gate at the Bottom of Stairs · Step 5 of 6 · Video by FairyBaby

Showing 0:06–0:09 of the source video. Watch the full video with every moment.
What happens in this clip
Locate the integrated pressure mounting bolts or spindles on all four corners (top-left, top-right, bottom-left, bottom-right) of the gate frame. Begin by hand-tightening each bolt by twisting it until its rubber pad makes initial contact with the wall, door frame, or banister. Then, as shown in the video's close-up (0:06-0:09), use the integrated turning mechanism or adjustment knob on each bolt to gradually and evenly tighten all four pressure points. Alternate tightening between the top and bottom, and left and right sides, applying even pressure until the gate frame is firmly wedged and secure without bowing or damaging the mounting surface.
Goal: Tighten the pressure mounting bolts on all four corners of the gate frame to securely wedge it into the opening.
What's used
Tools
- Gate Frame
- Integrated Pressure Mounting Bolts
About the full video
This video demonstrates the quick and easy installation of a pressure-mounted pet gate, specifically a Fairybaby "Narrow Spacing Gate," in a stairwell opening. The process involves positioning the gate, adjusting the pressure bolts to secure it, and testing the latch mechanism for pet containment.
Step 5 of 6: Apply Pressure and Secure
With the gate loosely in place, begin to tighten the pressure-mount posts evenly on both sides. Continue tightening until the gate feels stable and securely held between the walls or banisters. Periodically check that the gate remains level and plumb. The gate should be snug enough not to move easily but not so tight that it deforms the walls or posts.
Every video in How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Step 1: Choose Gate Location
- 0:30–0:56 Install Gate (Pressure Mounting)
- 0:04–0:06 Position the Gate Frame in Opening
- 1:32–1:39 Position Gate in Opening
Step 2: Assemble Gate Components
- 0:27–1:10 Assemble Gate Frame and Door
- 0:56–1:19 Install Gate Door and Optional Extensions
- 0:28–0:56 Measure Opening and Assemble Gate Frame
Step 3: Install Pressure-Mount Posts
- 0:15–0:31 Install the Gate Using Pressure Mount
- 0:25–0:32 Attach Pressure Mounts to Gate
- 1:31–1:52 Pressure Mount the Child Safety Gate
Step 4: Position Gate and Adjust Height
- 0:04–0:06 Position the Gate Frame in Opening
- 0:32–1:06 Position Gate and Check Initial Gap
- 0:05–0:08 Position and Secure the Gate
Step 5: Apply Pressure and Secure
- 1:27–1:39 Tighten Spindle Rods for Secure Installation
- 0:06–0:09 Adjust and Secure Pressure Mounts (this video)
- 0:54–1:14 Finalize Tension and Security Check
Step 6: Test Gate Operation and Stability
- 1:51–1:59 Test Gate Operation
- 1:11–1:59 Verify Gate Functionality and Safety
- 3:05–3:19 Test Gate Operation and SecurTech Lock
How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Outline for installing a pressure-mounted safety gate at the bottom of stairs to prevent unauthorized access, particularly for children or pets.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

