Tighten Spindle Rods for Secure Installation
From How to Install a Pressure-Mounted Gate at the Bottom of Stairs · Step 5 of 6 · Video by Carlson Pet Products

Showing 1:27–1:39 of the source video. Watch the full video with every moment.
What happens in this clip
Once the wall cups are installed (if used) or if you're pressure-mounting directly to the wall, reposition the gate in the opening. Begin to tighten each of the four spindle rods by turning their adjustment knobs. Tighten them evenly, alternating between sides and top/bottom, until the gate is securely held in place. The gate often has a visual indicator, such as a gap in the latch mechanism, that should close completely when adequate tension is achieved. Ensure all four rods are snug against the wall or wall cups.
Goal: Securely install the pet gate using tension
What's used
Tools
- Pet gate Carlson Pet Products
- Spindle Rods
About the full video
This DIY project provides a step-by-step guide to installing an extra-wide pressure-mounted pet gate in a doorway or opening. It covers measuring the opening, assembling the gate with spindle rods, optionally securing it with wall cups and screws, tightening the gate for a secure fit, and demonstrating the use of the small pet door and adjusting the main gate's swing direction.
What's said in this clip
to use the small pet door pull back on the spring pin
Automatically transcribed from the source video.
Step 5 of 6: Apply Pressure and Secure
With the gate loosely in place, begin to tighten the pressure-mount posts evenly on both sides. Continue tightening until the gate feels stable and securely held between the walls or banisters. Periodically check that the gate remains level and plumb. The gate should be snug enough not to move easily but not so tight that it deforms the walls or posts.
Every video in How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Step 1: Choose Gate Location
- 0:30–0:56 Install Gate (Pressure Mounting)
- 0:04–0:06 Position the Gate Frame in Opening
- 1:32–1:39 Position Gate in Opening
Step 2: Assemble Gate Components
- 0:27–1:10 Assemble Gate Frame and Door
- 0:56–1:19 Install Gate Door and Optional Extensions
- 0:28–0:56 Measure Opening and Assemble Gate Frame
Step 3: Install Pressure-Mount Posts
- 0:15–0:31 Install the Gate Using Pressure Mount
- 0:25–0:32 Attach Pressure Mounts to Gate
- 1:31–1:52 Pressure Mount the Child Safety Gate
Step 4: Position Gate and Adjust Height
- 0:04–0:06 Position the Gate Frame in Opening
- 0:32–1:06 Position Gate and Check Initial Gap
- 0:05–0:08 Position and Secure the Gate
Step 5: Apply Pressure and Secure
- 1:27–1:39 Tighten Spindle Rods for Secure Installation (this video)
- 0:06–0:09 Adjust and Secure Pressure Mounts
- 0:54–1:14 Finalize Tension and Security Check
Step 6: Test Gate Operation and Stability
- 1:51–1:59 Test Gate Operation
- 1:11–1:59 Verify Gate Functionality and Safety
- 3:05–3:19 Test Gate Operation and SecurTech Lock
Questions about How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Is a pressure-mounted gate truly safe for the bottom of stairs, and what are the main safety considerations?
Yes, pressure-mounted gates are suitable for the bottom of stairs, but their security relies entirely on proper installation. Always ensure the gate is installed perfectly level and the pressure mounts are tightened firmly against stable surfaces. Never use a pressure-mounted gate at the top of stairs, as a fall risk is too high if it were to dislodge.
What specific tools and additional materials might I need beyond the gate itself?
You'll definitely need a level to ensure proper alignment, and potentially a screwdriver or wrench for any assembly or fine-tuning of the pressure rods. If your staircase opening is wider than the standard gate, you'll also need to purchase a compatible gate extension kit to bridge the gap safely.
What are the most common installation mistakes beginners make, and how can I avoid them?
A frequent mistake is insufficient tightening of the pressure rods, which makes the gate unstable. Another is not using a level, leading to a crooked gate that might not latch properly. Always double-check tightness and gate alignment, and give the gate a firm push to test its security after installation.
My newly installed gate feels wobbly or doesn't seem secure; how can I troubleshoot this?
First, ensure all four pressure points are making solid, even contact with the walls or banisters and are tightened equally. If wobbling persists, check if your gate came with wall cups or adhesive pads, as these can provide a more grippy and stable surface for the pressure points. Re-adjust and tighten until it feels solid.
How long should this project take for someone with no DIY experience, and is it difficult?
This project is rated as beginner difficulty and should realistically take about 30 minutes to an hour. The estimated 2 hours in the project context likely accounts for unpacking, reading instructions thoroughly, and any minor adjustments. It's mainly about assembling parts and adjusting tension, making it quite straightforward.
What should I do if my stair opening is too wide for the standard pressure-mounted gate?
If your opening is wider than the gate's maximum extension, you'll need to purchase an extension kit specifically designed for your gate model. Measure the opening accurately before buying the gate, and ensure you get the correct number and size of extensions to achieve a snug and safe fit.
How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Outline for installing a pressure-mounted safety gate at the bottom of stairs to prevent unauthorized access, particularly for children or pets.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

