Assemble Gate Frame and Door
From How to Install a Pressure-Mounted Gate at the Bottom of Stairs · Step 2 of 6 · Video by Carlson Pet Products

Showing 0:27–1:10 of the source video. Watch the full video with every moment.
What happens in this clip
Lay the gate components on a flat surface. Attach any necessary extension panels to the main gate frame by sliding them together and securing them with the frame assembly screws using the provided hex key. Ensure these connections are firm and stable. Once the frame and extensions are assembled to the desired width, place the main swinging door panel into the gate frame. Insert the upper door mounting pin to secure the door within the frame, allowing it to pivot correctly.
Goal: Build the full gate assembly with extensions and swinging door.
What's used
Tools
- Extension Panels Carlson Pet Products
- Frame Assembly Screws Carlson Pet Products
- Gate Frame Sections Carlson Pet Products
- Hex Key Carlson Pet Products
- Upper Door Mount Pin Carlson Pet Products
About the full video
This project provides step-by-step instructions for installing an extra tall pressure-mounted pet gate in a doorway. It covers assembling the gate with extensions, positioning it, optionally installing wall cups for added security, and tightening the gate in place. It also demonstrates how to use the small pet door and adjust the gate's swing direction.
Step 2 of 6: Assemble Gate Components
Unpack all components of the safety gate. Follow the provided manual to connect the main gate panels, attach any included extension kits if needed for the stair width, and secure the swinging door mechanism. Ensure all connections are snug but do not overtighten.
Every video in How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Step 1: Choose Gate Location
- 0:30–0:56 Install Gate (Pressure Mounting)
- 0:04–0:06 Position the Gate Frame in Opening
- 1:32–1:39 Position Gate in Opening
Step 2: Assemble Gate Components
- 0:27–1:10 Assemble Gate Frame and Door (this video)
- 0:56–1:19 Install Gate Door and Optional Extensions
- 0:28–0:56 Measure Opening and Assemble Gate Frame
Step 3: Install Pressure-Mount Posts
- 0:15–0:31 Install the Gate Using Pressure Mount
- 0:25–0:32 Attach Pressure Mounts to Gate
- 1:31–1:52 Pressure Mount the Child Safety Gate
Step 4: Position Gate and Adjust Height
- 0:04–0:06 Position the Gate Frame in Opening
- 0:32–1:06 Position Gate and Check Initial Gap
- 0:05–0:08 Position and Secure the Gate
Step 5: Apply Pressure and Secure
- 1:27–1:39 Tighten Spindle Rods for Secure Installation
- 0:06–0:09 Adjust and Secure Pressure Mounts
- 0:54–1:14 Finalize Tension and Security Check
Step 6: Test Gate Operation and Stability
- 1:51–1:59 Test Gate Operation
- 1:11–1:59 Verify Gate Functionality and Safety
- 3:05–3:19 Test Gate Operation and SecurTech Lock
How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Outline for installing a pressure-mounted safety gate at the bottom of stairs to prevent unauthorized access, particularly for children or pets.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

