Finalize Tension and Security Check
From How to Install a Pressure-Mounted Gate at the Bottom of Stairs · Step 5 of 6 · Video by FairyBaby

Showing 0:54–1:14 of the source video. Watch the full video with every moment.
What happens in this clip
Once the gate is loosely in place, continue to tighten the tension rods. Work in an alternating pattern, tightening each of the four tension points a little bit at a time. This ensures even pressure and prevents the gate from becoming skewed. Continue tightening until the gate feels very secure and does not move when you push or lean on it. The gate should be firm and stable, preventing pets or children from dislodging it.
Goal: Ensure the gate is firmly secured and safe.
What's used
Tools
- Installed Dog Gate
- Small Wrench (if provided)
- Adjustable wrench
About the full video
This project provides step-by-step instructions for assembling and installing a tension-mounted dog gate without the need for drills or permanent mounts. It highlights the gate's ease of installation, adjustable width, secure fit, and features like a comfortable handle and tall design to keep pets and children safe.
Step 5 of 6: Apply Pressure and Secure
With the gate loosely in place, begin to tighten the pressure-mount posts evenly on both sides. Continue tightening until the gate feels stable and securely held between the walls or banisters. Periodically check that the gate remains level and plumb. The gate should be snug enough not to move easily but not so tight that it deforms the walls or posts.
Every video in How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Step 1: Choose Gate Location
- 0:30–0:56 Install Gate (Pressure Mounting)
- 0:04–0:06 Position the Gate Frame in Opening
- 1:32–1:39 Position Gate in Opening
Step 2: Assemble Gate Components
- 0:27–1:10 Assemble Gate Frame and Door
- 0:56–1:19 Install Gate Door and Optional Extensions
- 0:28–0:56 Measure Opening and Assemble Gate Frame
Step 3: Install Pressure-Mount Posts
- 0:15–0:31 Install the Gate Using Pressure Mount
- 0:25–0:32 Attach Pressure Mounts to Gate
- 1:31–1:52 Pressure Mount the Child Safety Gate
Step 4: Position Gate and Adjust Height
- 0:04–0:06 Position the Gate Frame in Opening
- 0:32–1:06 Position Gate and Check Initial Gap
- 0:05–0:08 Position and Secure the Gate
Step 5: Apply Pressure and Secure
- 1:27–1:39 Tighten Spindle Rods for Secure Installation
- 0:06–0:09 Adjust and Secure Pressure Mounts
- 0:54–1:14 Finalize Tension and Security Check (this video)
Step 6: Test Gate Operation and Stability
- 1:51–1:59 Test Gate Operation
- 1:11–1:59 Verify Gate Functionality and Safety
- 3:05–3:19 Test Gate Operation and SecurTech Lock
How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Outline for installing a pressure-mounted safety gate at the bottom of stairs to prevent unauthorized access, particularly for children or pets.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

