Test Gate Operation
From How to Install a Pressure-Mounted Gate at the Bottom of Stairs · Step 6 of 6 · Video by RegaloBaby

Showing 1:51–1:59 of the source video. Watch the full video with every moment.
What happens in this clip
With the gate fully installed and secured, perform a test of its operation. To open the gate, rotate the latch clockwise. Then, lift the gate slightly to clear the lower latch and pivot it open. Ensure that the gate swings smoothly, and that the latch mechanism engages and disengages effortlessly and securely when closing the gate.
Goal: Verify proper functioning of the installed gate
About the full video
This project provides step-by-step instructions for installing a Regalo Top of Stairs Gate. It covers locating studs, drilling pilot holes, mounting hinges and latches, assembling the gate panels, connecting them with couplers, and finally adjusting and securing the gate to ensure child safety at the top of a staircase.
Step 6 of 6: Test Gate Operation and Stability
Open and close the gate several times to ensure the swinging mechanism operates smoothly. Gently push and pull on the gate from different angles to confirm it is stable and does not shift or loosen. Check that the locking mechanism engages securely.
Every video in How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Step 1: Choose Gate Location
- 0:30–0:56 Install Gate (Pressure Mounting)
- 0:04–0:06 Position the Gate Frame in Opening
- 1:32–1:39 Position Gate in Opening
Step 2: Assemble Gate Components
- 0:27–1:10 Assemble Gate Frame and Door
- 0:56–1:19 Install Gate Door and Optional Extensions
- 0:28–0:56 Measure Opening and Assemble Gate Frame
Step 3: Install Pressure-Mount Posts
- 0:15–0:31 Install the Gate Using Pressure Mount
- 0:25–0:32 Attach Pressure Mounts to Gate
- 1:31–1:52 Pressure Mount the Child Safety Gate
Step 4: Position Gate and Adjust Height
- 0:04–0:06 Position the Gate Frame in Opening
- 0:32–1:06 Position Gate and Check Initial Gap
- 0:05–0:08 Position and Secure the Gate
Step 5: Apply Pressure and Secure
- 1:27–1:39 Tighten Spindle Rods for Secure Installation
- 0:06–0:09 Adjust and Secure Pressure Mounts
- 0:54–1:14 Finalize Tension and Security Check
Step 6: Test Gate Operation and Stability
- 1:51–1:59 Test Gate Operation (this video)
- 1:11–1:59 Verify Gate Functionality and Safety
- 3:05–3:19 Test Gate Operation and SecurTech Lock
How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Outline for installing a pressure-mounted safety gate at the bottom of stairs to prevent unauthorized access, particularly for children or pets.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

