Pressure Mount the Child Safety Gate
From How to Install a Pressure-Mounted Gate at the Bottom of Stairs · Step 3 of 6 · Video by Senorita Ace

Showing 1:31–1:52 of the source video. Watch the full video with every moment.
What happens in this clip
With the wood board now securely in place on the banister, you can proceed to pressure mount the child safety gate. Position the gate between the installed wood board and the opposite side of the stairwell opening (either a wall or another newel post). Extend the pressure rods of the gate until they make firm contact with both surfaces. Tighten the gate according to its manufacturer's instructions until it is stable and secure. The video mentions that you can optionally apply double-sided tape between the gate's pressure feet and the wood board for additional grip, although it was not used in this specific demonstration.
Goal: Securely install the child safety gate in the stairwell opening.
What's used
Tools
- Child Safety Gate Unspecified
- Solid Pine Wood Board (with tape and zip ties) Unspecified
About the full video
This DIY project provides step-by-step instructions on how to install a pressure-mounted child safety gate on a stairwell banister. It involves creating a stable mounting surface on the banister using a solid pine board, securing it with double-sided tape and zip ties, and then pressure-mounting the gate to this new surface.
Step 3 of 6: Install Pressure-Mount Posts
Locate the pressure-mount posts or pads that came with your gate. These typically screw into the side of the gate frame or attach via specific hardware. Ensure they are firmly attached and oriented correctly to press against the wall or stair banister.
Every video in How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Step 1: Choose Gate Location
- 0:30–0:56 Install Gate (Pressure Mounting)
- 0:04–0:06 Position the Gate Frame in Opening
- 1:32–1:39 Position Gate in Opening
Step 2: Assemble Gate Components
- 0:27–1:10 Assemble Gate Frame and Door
- 0:56–1:19 Install Gate Door and Optional Extensions
- 0:28–0:56 Measure Opening and Assemble Gate Frame
Step 3: Install Pressure-Mount Posts
- 0:15–0:31 Install the Gate Using Pressure Mount
- 0:25–0:32 Attach Pressure Mounts to Gate
- 1:31–1:52 Pressure Mount the Child Safety Gate (this video)
Step 4: Position Gate and Adjust Height
- 0:04–0:06 Position the Gate Frame in Opening
- 0:32–1:06 Position Gate and Check Initial Gap
- 0:05–0:08 Position and Secure the Gate
Step 5: Apply Pressure and Secure
- 1:27–1:39 Tighten Spindle Rods for Secure Installation
- 0:06–0:09 Adjust and Secure Pressure Mounts
- 0:54–1:14 Finalize Tension and Security Check
Step 6: Test Gate Operation and Stability
- 1:51–1:59 Test Gate Operation
- 1:11–1:59 Verify Gate Functionality and Safety
- 3:05–3:19 Test Gate Operation and SecurTech Lock
How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Outline for installing a pressure-mounted safety gate at the bottom of stairs to prevent unauthorized access, particularly for children or pets.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

