Install Gate (Pressure Mounting)
From How to Install a Pressure-Mounted Gate at the Bottom of Stairs · Step 1 of 6 · Video by North States Industries

Showing 0:30–0:56 of the source video. Watch the full video with every moment.
What happens in this clip
For pressure mounting, position the gate within the desired opening, such as a doorway. Ensure the locking handle mechanism is facing away from the child's side to prevent accidental operation. Gradually expand the gate until all four side bumpers make firm contact with the sides of the opening. To secure the gate, rotate the locking handle into its designated slot. Apply sufficient tension to ensure the gate is snugly held in place and does not easily shift. The handle tab should audibly 'click' into its locked position. To release the gate, press down on the handle, pull it outwards from the slot, and then rotate it upwards.
Goal: Securely install the gate by creating pressure against the opening.
What's used
Tools
- Supergate Classic Baby Gate North States
About the full video
This project provides a comprehensive guide on how to install the North States Supergate Classic baby gate using both pressure mounting and hardware mounting methods. It details the steps for unpacking, setting up pressure-mounted configurations, enhancing security with door sockets, and performing a more permanent hardware-mounted installation, along with crucial safety advice.
Step 1 of 6: Choose Gate Location
Identify the ideal spot for the gate installation at the base of the stairs. This location should offer a flat and stable surface on both sides to properly seat the pressure-mounted posts. Avoid areas with significant floor molding or uneven surfaces that could compromise the gate's stability.
Every video in How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Step 1: Choose Gate Location
- 0:30–0:56 Install Gate (Pressure Mounting) (this video)
- 0:04–0:06 Position the Gate Frame in Opening
- 1:32–1:39 Position Gate in Opening
Step 2: Assemble Gate Components
- 0:27–1:10 Assemble Gate Frame and Door
- 0:56–1:19 Install Gate Door and Optional Extensions
- 0:28–0:56 Measure Opening and Assemble Gate Frame
Step 3: Install Pressure-Mount Posts
- 0:15–0:31 Install the Gate Using Pressure Mount
- 0:25–0:32 Attach Pressure Mounts to Gate
- 1:31–1:52 Pressure Mount the Child Safety Gate
Step 4: Position Gate and Adjust Height
- 0:04–0:06 Position the Gate Frame in Opening
- 0:32–1:06 Position Gate and Check Initial Gap
- 0:05–0:08 Position and Secure the Gate
Step 5: Apply Pressure and Secure
- 1:27–1:39 Tighten Spindle Rods for Secure Installation
- 0:06–0:09 Adjust and Secure Pressure Mounts
- 0:54–1:14 Finalize Tension and Security Check
Step 6: Test Gate Operation and Stability
- 1:51–1:59 Test Gate Operation
- 1:11–1:59 Verify Gate Functionality and Safety
- 3:05–3:19 Test Gate Operation and SecurTech Lock
How to Install a Pressure-Mounted Gate at the Bottom of Stairs
Outline for installing a pressure-mounted safety gate at the bottom of stairs to prevent unauthorized access, particularly for children or pets.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

