Locate and Mark Studs with Stud Finder
From How to Find Studs and Set the Right Handrail Height · Step 2 of 5 · Video by The Fixer 2

Showing 0:34–1:16 of the source video. Watch the full video with every moment.
What happens in this clip
To ensure accuracy, use an electronic stud finder. Calibrate the stud finder by pressing it flat against the wall and moving it slowly horizontally until it indicates a stud. Mark the detected edges of the stud, then find the center of the stud and mark it clearly with a pencil. Repeat this process to locate at least two adjacent studs to verify consistent spacing.
Goal: Utilize an electronic stud finder to precisely identify the center of wall studs and mark their positions on the wall.
What's used
Tools
- Pencil
- Ryobi Stud Finder
About the full video
This video details the crucial initial steps of installing an articulating arm TV wall mount, focusing on how to accurately locate wall studs and address challenges posed by non-standard stud spacing. The presenter demonstrates using a stud finder, measuring stud distances, and reviewing the mounting template. He then evaluates options for proceeding when stud spacing doesn't align with the mount's design, ultimately deciding on a strategy involving one stud and drywall anchors.
Step 2 of 5: Locate Wall Studs
At each marked height, use an electronic stud finder to locate the vertical wall studs. Once a stud is detected, slide the finder horizontally to find its edges and then mark the centerlines of the studs. Repeat this process for all desired mounting locations.
Every video in How to Find Studs and Set the Right Handrail Height
Step 1: Determine Handrail Height
- 0:47–1:58 Mark Handrail Height
- 0:40–1:07 Measure Handrail Height
- 3:48–4:29 Verify Handrail Height for Code Compliance
Step 2: Locate Wall Studs
- 3:11–4:40 Utilize an Electronic Stud Finder and Mount Item
- 0:34–1:16 Locate and Mark Studs with Stud Finder (this video)
- 0:04–0:13 Locate Wall Studs
Step 3: Mark Support Bracket Locations
- 1:25–2:44 Install Handrail Brackets (Wood Studs)
- 2:22–2:54 Mark Screw Locations
- 2:46–3:44 Locate and Mark Studs for Brackets
Step 4: Drill Pilot Holes
- 1:47–2:15 Locate Studs and Drill Pilot Holes
- 0:31–0:38 Drill Pilot Holes
- 8:51–9:40 Pre-Drill Pilot Holes
Step 5: Attach Support Brackets
- 0:23–0:35 Install Handrail Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
- 2:15–2:28 Mount Handrail Brackets
How to Find Studs and Set the Right Handrail Height
This project outlines the steps to locate wall studs and determine the correct height for installing a handrail, ensuring safety and code compliance for stairways and accessible routes.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

