Locate and Mark Studs for Brackets
From How to Find Studs and Set the Right Handrail Height · Step 3 of 5 · Video by Optimum Works Inc.

Showing 2:46–3:44 of the source video. Watch the full video with every moment.
What happens in this clip
Using a magnetic stud finder, slide it along the wall to locate the hidden wall studs. When the stud finder 'sticks' or indicates a stud, use a pencil to mark the center of the stud. Repeat this process for all required stud locations along the path of the handrail. The number of studs you need to locate depends on the length of your handrail and the number of brackets provided. For example, a 3-foot handrail typically uses two brackets, so you would need to find two studs. Mark the location of each stud on the wall, preferably below the string line, for later bracket installation.
Goal: Find and mark the center of wall studs for secure bracket installation.
What's used
Tools
- Magnetic Stud Finder
- Pencil
About the full video
This project provides a step-by-step guide on how to install a handrail into drywall, covering everything from gathering tools and marking heights to securing the brackets and the handrail itself. The instructions emphasize proper measurement, stud finding, and careful assembly to ensure a sturdy and safe installation.
Step 3 of 5: Mark Support Bracket Locations
Hold a handrail bracket against the wall at the desired height, ensuring it is centered over a marked stud centerline. Use a pencil to mark the screw hole locations through the bracket onto the wall. For longer runs, use a level to ensure brackets are vertically aligned.
Every video in How to Find Studs and Set the Right Handrail Height
Step 1: Determine Handrail Height
- 0:47–1:58 Mark Handrail Height
- 0:40–1:07 Measure Handrail Height
- 3:48–4:29 Verify Handrail Height for Code Compliance
Step 2: Locate Wall Studs
- 3:11–4:40 Utilize an Electronic Stud Finder and Mount Item
- 0:34–1:16 Locate and Mark Studs with Stud Finder
- 0:04–0:13 Locate Wall Studs
Step 3: Mark Support Bracket Locations
- 1:25–2:44 Install Handrail Brackets (Wood Studs)
- 2:22–2:54 Mark Screw Locations
- 2:46–3:44 Locate and Mark Studs for Brackets (this video)
Step 4: Drill Pilot Holes
- 1:47–2:15 Locate Studs and Drill Pilot Holes
- 0:31–0:38 Drill Pilot Holes
- 8:51–9:40 Pre-Drill Pilot Holes
Step 5: Attach Support Brackets
- 0:23–0:35 Install Handrail Brackets
- 2:28–2:44 Install Brackets and Mount Handrail
- 2:15–2:28 Mount Handrail Brackets
How to Find Studs and Set the Right Handrail Height
This project outlines the steps to locate wall studs and determine the correct height for installing a handrail, ensuring safety and code compliance for stairways and accessible routes.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

