Install Handrail Brackets
From How to Find Studs and Set the Right Handrail Height · Step 5 of 5 · Video by Amen Panesar

Showing 0:23–0:35 of the source video. Watch the full video with every moment.
What happens in this clip
Align the handrail brackets with the marked stud locations and the string line. Using a cordless drill/driver, attach the brackets to the wall. Make sure to use appropriate screws that are long enough to penetrate the drywall and securely anchor into the center of the wall studs. The video shows the use of a cordless drill/driver to screw the brackets into place.
Goal: Securely attach the support brackets to the wall
What's used
Tools
- Cordless Drill/Driver Ryobi
- Impact driver
- Handrail Brackets
- Screws
About the full video
This project provides a step-by-step guide on how to install a handrail along a staircase, focusing on proper measurement, stud location, and secure mounting to ensure safety and compliance with building codes.
Step 5 of 5: Attach Support Brackets
Place each handrail bracket over the pre-drilled pilot holes. Insert the appropriate screws (typically lag screws or wood screws designed for structural support) through the bracket and into the pilot holes. Tighten the screws firmly with a drill or wrench until the bracket is snug against the wall and securely engaged with the stud. Do not overtighten, which can strip the wood or damage the drywall.
Every video in How to Find Studs and Set the Right Handrail Height
Step 1: Determine Handrail Height
- 0:47–1:58 Mark Handrail Height
- 0:40–1:07 Measure Handrail Height
- 3:48–4:29 Verify Handrail Height for Code Compliance
Step 2: Locate Wall Studs
- 3:11–4:40 Utilize an Electronic Stud Finder and Mount Item
- 0:34–1:16 Locate and Mark Studs with Stud Finder
- 0:04–0:13 Locate Wall Studs
Step 3: Mark Support Bracket Locations
- 1:25–2:44 Install Handrail Brackets (Wood Studs)
- 2:22–2:54 Mark Screw Locations
- 2:46–3:44 Locate and Mark Studs for Brackets
Step 4: Drill Pilot Holes
- 1:47–2:15 Locate Studs and Drill Pilot Holes
- 0:31–0:38 Drill Pilot Holes
- 8:51–9:40 Pre-Drill Pilot Holes
Step 5: Attach Support Brackets
- 0:23–0:35 Install Handrail Brackets (this video)
- 2:28–2:44 Install Brackets and Mount Handrail
- 2:15–2:28 Mount Handrail Brackets
How to Find Studs and Set the Right Handrail Height
This project outlines the steps to locate wall studs and determine the correct height for installing a handrail, ensuring safety and code compliance for stairways and accessible routes.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

