Power On and Test LED Strip
From How to Connect LED Light Strips to a Controller and Power Supply · Step 3 of 4 · Video by Siwelo Lighting

Showing 0:12–0:15 of the source video. Watch the full video with every moment.
What happens in this clip
Once the power wires are securely connected between the LED controller and the power supply, locate the power switch on the LED controller. Toggle the power switch to the 'ON' position. Observe the LED Profile Power Supply; a small green indicator light should illuminate, signifying that the PSU is active and supplying power. Simultaneously, the LED strip light, which was initially blue, should now activate fully and cycle through various colors, confirming successful power delivery and operation of the entire system.
What's used
Tools
- LED Controller
- LED Profile Power Supply (PSU)
- LED Strip Light
About the full video
This video demonstrates the connection of an LED strip light system, including an LED strip, an LED controller, and a power supply unit (PSU). It shows the final wiring steps to connect the LED controller to the power supply via screw terminals and then powers on the system to showcase the LED strip's functionality.
Step 3 of 4: Test the Lighting System
Ensure all connections are secure and correctly wired. Plug the power supply into a wall outlet or connect it to its own power source. Observe the LED light strips. They should turn on, possibly to a default color or setting. Use the remote control, mobile app, or physical buttons on the controller (depending on the type) to cycle through colors, brightness levels, and any pre-programmed effects. Verify that all colors (red, green, blue, white) are functioning correctly and that the transitions between them are smooth. If using multiple strips, ensure they are all responding in sync with the controller.
Every video in How to Connect LED Light Strips to a Controller and Power Supply
Step 1: Connect LED Strips to Controller
- 0:20–0:23 Connect LED Light Strips to Controller
- 0:27–0:42 Connect LED Strips to Controller
- 4:49–5:59 Connect LED Strip to Controller
Step 2: Connect Controller to Power Supply
- 0:05–0:12 Connect LED Controller to Power Supply
- 0:23–0:34 Connect Power Adapter to LED Controller
- 0:09–0:12 Connect Power Supply to LED Controller
Step 3: Test the Lighting System
- 1:11–1:33 Power Up and Test
- 0:12–0:15 Power On and Test LED Strip (this video)
- 1:20–1:50 Power On and Initial Test
Step 4: Mount LED Strips and Controller
- 0:01–0:07 Mount the LED Strips
- 0:01–0:02 Mount the LED Controller
- 6:21–7:00 Mount LED Strip and Consider Extrusion
Questions about How to Connect LED Light Strips to a Controller and Power Supply
Do I absolutely need to solder the connections for this LED strip project?
While soldering provides the most secure and reliable connection, it's not strictly necessary. Many LED strips and connectors allow for solderless connections using clamping mechanisms or quick connectors, which are great for beginners. If you opt to solder, ensure you have proper ventilation and safety gear, and practice on scrap wire first.
What are the most important safety precautions to take when working with electrical components like LED strips and power supplies?
Always ensure the power supply is unplugged from the wall outlet before making any connections or adjustments. Use appropriate wire gauges for your setup and double-check all connections for correct polarity to prevent shorts. If you are unsure about any electrical step, consult a qualified electrician or refer to your product manuals.
My LED strip isn't lighting up, or the colors are incorrect after connecting everything. What should I troubleshoot first?
First, verify that the power supply is plugged in and providing power, and check for any blown fuses. Next, inspect all your connections for correct polarity (positive to positive, negative to negative, and matching color channels for RGB/RGBW). Ensure the LED strip and controller are compatible, and that the strip is cut only at designated cut points if you've shortened it.
How difficult is this project for someone new to DIY electrical work, and how long does it typically take?
This project is rated as 'beginner' difficulty because it involves low-voltage DC electricity, which is generally safer than household AC wiring. The estimated time is 4 hours, but actual time can vary based on your experience level, the complexity of your setup, and how many strips or connections you are making.
Are there different types of LED strips or controllers I should consider beyond the ones listed?
Yes, many options exist depending on your desired effect. The project mentions RGB+W COB strips, which offer excellent color mixing and uniform light. You can also find single-color, RGB-only, or individually addressable (pixel) LED strips. Controllers vary from simple remote-controlled units to advanced smart home integrated systems; choose based on desired functionality and compatibility.
How do I choose the right power supply for my LED strip setup?
You need to match the voltage (e.g., 12V or 24V) of your LED strips and controller. To determine the necessary wattage, multiply the strip's watts per foot by its total length, then add a 10-20% buffer for safety and efficiency. Ensure your power supply's wattage output exceeds this calculated total to prevent overload.
What considerations should I have when deciding where to mount the LED strips and controller?
Plan your layout carefully, ensuring the power supply and controller are easily accessible for future adjustments or troubleshooting. Avoid placing components in areas prone to moisture or extreme heat unless they are specifically rated for those conditions. Ensure the surface for mounting the strips is clean and dry for optimal adhesive performance.
How to Connect LED Light Strips to a Controller and Power Supply
This project outlines the steps for connecting LED light strips to a controller and power supply for a DIY lighting setup.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

