powered by

Connect LED Strips to Controller

From How to Connect LED Light Strips to a Controller and Power Supply · Step 1 of 4 · Video by Parts Express

Showing 0:27–0:42 of the source video. Watch the full video with every moment.

What happens in this clip

Ensure that the LED light strips you plan to use are designed with 4-pin connections. Take the LED strip's connector and carefully plug it into the corresponding port on the Wi-Fi LED controller. It is crucial to align the small arrows present on both the LED strip connector and the controller to ensure correct polarity and prevent damage to the components.

Goal: Securely connect the 4-pin LED strip to the controller.

What's used

Tools

  • 4-pin LED Light Strip Unspecified
  • RGBW LED light strip
  • Wi-Fi LED Controller Unspecified

About the full video

This project provides a step-by-step guide on how to install and control LED light strips using a Wi-Fi controller, a dedicated smartphone app (Magic Home Pro), and voice assistants like Google Home or Amazon Alexa. It covers both general room lighting and TV backlighting applications.

Step 1 of 4: Connect LED Strips to Controller

Locate the input ports on the LED controller, typically labeled for 'R', 'G', 'B', and 'W' (or similar, depending on the controller type, e.g., single color, RGB, RGBW). Identify the corresponding connectors on the LED light strips. For RGBW strips, there will be separate connections for red, green, blue, and white LEDs. For single or dual-color strips, connect the appropriate wires to the designated ports. Pay close attention to the polarity markings (+ and -) on both the controller and the strip connectors to ensure they are matched correctly. If using solderless connectors, slide the strip into the connector, ensuring the copper contacts align with the pins. If soldering, carefully solder the wires to the designated pads on the strip, again observing polarity.

Open this step in the guide

Every video in How to Connect LED Light Strips to a Controller and Power Supply

  1. Step 1: Connect LED Strips to Controller

  2. Step 2: Connect Controller to Power Supply

  3. Step 3: Test the Lighting System

  4. Step 4: Mount LED Strips and Controller

How to Connect LED Light Strips to a Controller and Power Supply

This project outlines the steps for connecting LED light strips to a controller and power supply for a DIY lighting setup.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Connect LED Strips to Controller — How to Connect LED Light Strips to a Controller and Power Supply | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.