How to Wire LED DMX Pixel Tape Rope with Power Adapter and DMX Controller #tutorial
Video by Siwelo Lighting · 2 moments used in Oak Valley Designs's DIY guides · 0:16 long

Moments in this video
- 0:05–0:12 Connect LED Controller to Power Supply
From How to Connect LED Light Strips to a Controller and Power Supply, Step 2: Connect Controller to Power Supply
Locate the power input terminals on the LED controller (labeled 'POWER') and the output terminals on the LED Profile Power Supply. The video shows two main power wires (red and blue) extending from the LED controller's power input. Connect the red wire from the LED controller to the positive (+) screw terminal on the power supply. Connect the blue wire from the LED controller to the negative (-) screw terminal on the power supply. Ensure all connections are secure by tightening the screw terminals. This step is crucial for providing DC power from the PSU to the LED controller, which then powers the LED strip.
- 0:12–0:15 Power On and Test LED Strip
From How to Connect LED Light Strips to a Controller and Power Supply, Step 3: Test the Lighting System
Once the power wires are securely connected between the LED controller and the power supply, locate the power switch on the LED controller. Toggle the power switch to the 'ON' position. Observe the LED Profile Power Supply; a small green indicator light should illuminate, signifying that the PSU is active and supplying power. Simultaneously, the LED strip light, which was initially blue, should now activate fully and cycle through various colors, confirming successful power delivery and operation of the entire system.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

