Connect Power Supply to LED Controller
From How to Connect LED Light Strips to a Controller and Power Supply · Step 2 of 4 · Video by plus electronic center

Showing 0:09–0:12 of the source video. Watch the full video with every moment.
What happens in this clip
Once the power supply's DC output terminals are identified, connect them to the power input terminals of the LED controller. The video shows red wires being used for positive ('V+' from power supply to '+' on controller) and black wires for negative ('V-' from power supply to '-' or 'GND' on controller). Ensure these connections are secure to provide stable power to the controller. The LED controller typically accepts a DC voltage ranging from 5V to 24V, so verify compatibility with your power supply's output.
Goal: Provide DC power from the power supply to the LED controller.
What's used
Tools
- LED Controller
- LED Power Supply
Materials
- Black Wires
- Red Wires
- Screwdriver
About the full video
This project illustrates the process of wiring a power supply to an LED controller and subsequently connecting the controller to LED pixel lights. It details the AC input for the power supply, DC output connections to the controller, and the data/power connections from the controller to the LED lights, providing a clear visual guide for setting up an LED lighting system.
Step 2 of 4: Connect Controller to Power Supply
Identify the power input connector on the LED controller. This is usually a barrel jack or a pair of screw terminals labeled 'DC IN', '+/-', or similar. Locate the output connector from your power supply. This might be a barrel plug or bare wires. Connect the power supply's output to the controller's input. If using a barrel plug, ensure it matches the controller's jack size and that the center pin is positive (+) and the outer sleeve is negative (-), or vice-versa, as specified by the controller. If using screw terminals or bare wires, connect the positive (+) wire from the power supply to the positive (+) terminal on the controller and the negative (-) wire to the negative (-) terminal. Double-check the voltage rating of both the power supply and the controller to ensure they are compatible (e.g., both 12V or both 24V).
Every video in How to Connect LED Light Strips to a Controller and Power Supply
Step 1: Connect LED Strips to Controller
- 0:20–0:23 Connect LED Light Strips to Controller
- 0:27–0:42 Connect LED Strips to Controller
- 4:49–5:59 Connect LED Strip to Controller
Step 2: Connect Controller to Power Supply
- 0:05–0:12 Connect LED Controller to Power Supply
- 0:23–0:34 Connect Power Adapter to LED Controller
- 0:09–0:12 Connect Power Supply to LED Controller (this video)
Step 3: Test the Lighting System
- 1:11–1:33 Power Up and Test
- 0:12–0:15 Power On and Test LED Strip
- 1:20–1:50 Power On and Initial Test
Step 4: Mount LED Strips and Controller
- 0:01–0:07 Mount the LED Strips
- 0:01–0:02 Mount the LED Controller
- 6:21–7:00 Mount LED Strip and Consider Extrusion
How to Connect LED Light Strips to a Controller and Power Supply
This project outlines the steps for connecting LED light strips to a controller and power supply for a DIY lighting setup.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

