Mount the LED Strips
From How to Connect LED Light Strips to a Controller and Power Supply · Step 4 of 4 · Video by Smart Bright LEDs

Showing 0:01–0:07 of the source video. Watch the full video with every moment.
What happens in this clip
The flexible LED strips typically come with an adhesive backing. After peeling off the protective film, carefully press the strip onto the prepared surface, ensuring firm and even contact along its entire length. For sections that might require extra support, or if the adhesive is not strong enough for the surface, small mounting clips can be used, secured with screws or stronger adhesive.
Goal: Mount the flexible LED strips to the chosen surface.
What's used
Tools
- Mounting Clips
- Silicone adhesive
- especially on textured or frequently touched surfaces.
- Screwdriver
- Small Screws
About the full video
This project guides users on how to install flexible, color-changing LED light strips for various DIY applications, such as accent lighting, under-cabinet lighting, or decorative illumination. The video showcases the appearance and basic functionality of these strips, including their flexibility and ability to display multiple colors, serving as the core component for this DIY project.
Step 4 of 4: Mount LED Strips and Controller
For LED light strips with an adhesive backing, ensure the mounting surface is clean, dry, and smooth. Remove the protective film from the adhesive and carefully press the strip into place, applying firm pressure along its entire length. If the adhesive is not sufficient, consider using mounting clips or double-sided tape designed for heavier-duty applications. For the controller, mount it in a convenient and accessible location, preferably near the power source and where the LED strips can be easily routed. Use screws, double-sided tape, or zip ties to secure the controller, ensuring it is stable and protected from damage.
Every video in How to Connect LED Light Strips to a Controller and Power Supply
Step 1: Connect LED Strips to Controller
- 0:20–0:23 Connect LED Light Strips to Controller
- 0:27–0:42 Connect LED Strips to Controller
- 4:49–5:59 Connect LED Strip to Controller
Step 2: Connect Controller to Power Supply
- 0:05–0:12 Connect LED Controller to Power Supply
- 0:23–0:34 Connect Power Adapter to LED Controller
- 0:09–0:12 Connect Power Supply to LED Controller
Step 3: Test the Lighting System
- 1:11–1:33 Power Up and Test
- 0:12–0:15 Power On and Test LED Strip
- 1:20–1:50 Power On and Initial Test
Step 4: Mount LED Strips and Controller
- 0:01–0:07 Mount the LED Strips (this video)
- 0:01–0:02 Mount the LED Controller
- 6:21–7:00 Mount LED Strip and Consider Extrusion
How to Connect LED Light Strips to a Controller and Power Supply
This project outlines the steps for connecting LED light strips to a controller and power supply for a DIY lighting setup.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

