powered by

Connect Power Adapter to LED Controller

From How to Connect LED Light Strips to a Controller and Power Supply · Step 2 of 4 · Video by Travel Tech Balaji

Showing 0:23–0:34 of the source video. Watch the full video with every moment.

What happens in this clip

First, take the 12V 2A power adapter and securely plug its output connector into the designated circular input port on the LED controller. This connection supplies the necessary power to the controller, which then regulates it for the LED strip.

Goal: Provide power to the LED controller

What's used

Tools

  • 12V 2A Power Adapter
  • LED Controller

About the full video

This project provides a step-by-step guide on how to install and operate a multicolor LED strip light kit. It covers connecting the 12V 2A power adapter to the LED controller, then connecting the LED strip to the controller, and finally demonstrates controlling the strip's colors, brightness, and modes using a 24-key IR remote control.

What's said in this clip

Connect the charger to the port on the back side of the controller

Automatically transcribed from the source video.

Step 2 of 4: Connect Controller to Power Supply

Identify the power input connector on the LED controller. This is usually a barrel jack or a pair of screw terminals labeled 'DC IN', '+/-', or similar. Locate the output connector from your power supply. This might be a barrel plug or bare wires. Connect the power supply's output to the controller's input. If using a barrel plug, ensure it matches the controller's jack size and that the center pin is positive (+) and the outer sleeve is negative (-), or vice-versa, as specified by the controller. If using screw terminals or bare wires, connect the positive (+) wire from the power supply to the positive (+) terminal on the controller and the negative (-) wire to the negative (-) terminal. Double-check the voltage rating of both the power supply and the controller to ensure they are compatible (e.g., both 12V or both 24V).

Open this step in the guide

Every video in How to Connect LED Light Strips to a Controller and Power Supply

  1. Step 1: Connect LED Strips to Controller

  2. Step 2: Connect Controller to Power Supply

  3. Step 3: Test the Lighting System

  4. Step 4: Mount LED Strips and Controller

Questions about How to Connect LED Light Strips to a Controller and Power Supply

Do I absolutely need to solder the connections for this LED strip project?

While soldering provides the most secure and reliable connection, it's not strictly necessary. Many LED strips and connectors allow for solderless connections using clamping mechanisms or quick connectors, which are great for beginners. If you opt to solder, ensure you have proper ventilation and safety gear, and practice on scrap wire first.

What are the most important safety precautions to take when working with electrical components like LED strips and power supplies?

Always ensure the power supply is unplugged from the wall outlet before making any connections or adjustments. Use appropriate wire gauges for your setup and double-check all connections for correct polarity to prevent shorts. If you are unsure about any electrical step, consult a qualified electrician or refer to your product manuals.

My LED strip isn't lighting up, or the colors are incorrect after connecting everything. What should I troubleshoot first?

First, verify that the power supply is plugged in and providing power, and check for any blown fuses. Next, inspect all your connections for correct polarity (positive to positive, negative to negative, and matching color channels for RGB/RGBW). Ensure the LED strip and controller are compatible, and that the strip is cut only at designated cut points if you've shortened it.

How difficult is this project for someone new to DIY electrical work, and how long does it typically take?

This project is rated as 'beginner' difficulty because it involves low-voltage DC electricity, which is generally safer than household AC wiring. The estimated time is 4 hours, but actual time can vary based on your experience level, the complexity of your setup, and how many strips or connections you are making.

Are there different types of LED strips or controllers I should consider beyond the ones listed?

Yes, many options exist depending on your desired effect. The project mentions RGB+W COB strips, which offer excellent color mixing and uniform light. You can also find single-color, RGB-only, or individually addressable (pixel) LED strips. Controllers vary from simple remote-controlled units to advanced smart home integrated systems; choose based on desired functionality and compatibility.

How do I choose the right power supply for my LED strip setup?

You need to match the voltage (e.g., 12V or 24V) of your LED strips and controller. To determine the necessary wattage, multiply the strip's watts per foot by its total length, then add a 10-20% buffer for safety and efficiency. Ensure your power supply's wattage output exceeds this calculated total to prevent overload.

What considerations should I have when deciding where to mount the LED strips and controller?

Plan your layout carefully, ensuring the power supply and controller are easily accessible for future adjustments or troubleshooting. Avoid placing components in areas prone to moisture or extreme heat unless they are specifically rated for those conditions. Ensure the surface for mounting the strips is clean and dry for optimal adhesive performance.

How to Connect LED Light Strips to a Controller and Power Supply

This project outlines the steps for connecting LED light strips to a controller and power supply for a DIY lighting setup.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Connect Power Adapter to LED Controller — How to Connect LED Light Strips to a Controller and Power Supply | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.