powered by

Cut and Install the Skirt Board

From How to Scribe and Cut a Stair Skirt Board to Fit · Step 3 of 5 · Video by stairbuilding

Showing 2:44–4:14 of the source video. Watch the full video with every moment.

What happens in this clip

Once all horizontal and vertical lines representing the stair profile are clearly marked on the temporary board, carefully detach it from the wall or stair stringer. Using an appropriate saw (e.g., jigsaw, circular saw, or handsaw), precisely cut along the marked lines. After cutting, position the newly cut skirt board (which is now the finished piece) into its final desired location against the staircase. If you observe any small, unacceptable gaps (e.g., at the inner corners where the riser meets the tread), you can carefully raise the entire skirt board slightly. The 'insurance' measurement added in the previous step should provide enough material to allow for this minor vertical adjustment, ensuring a tight fit at all points. This final adjustment eliminates any remaining small gaps caused by subtle imperfections in the existing stairs.

Goal: After all necessary lines are marked on the temporary board, detach it, cut along the marked profile, and then position the final skirt board in place, making minor adjustments if any small gaps remain.

What's used

Tools

  • Pencil/Marker
  • Saw

About the full video

This project provides a detailed method for accurately marking a stair stringer (skirt board) for cutting, especially when dealing with existing staircases that have inconsistent rise and run dimensions. By using a temporary board, a level, and careful measurement, the process ensures a precise fit for each step, minimizing gaps and creating a professional finish.

Step 3 of 5: Cut the Skirt Board

Carefully cut the skirt board material along the pencil lines transferred from the stairs. Use a jigsaw or a handsaw for precise cutting. Take your time to ensure clean cuts that accurately follow the scribed profile.

Open this step in the guide

Every video in How to Scribe and Cut a Stair Skirt Board to Fit

  1. Step 1: Measure and Mark Riser Heights

  2. Step 2: Transfer Stair Profile to Skirt Board

  3. Step 3: Cut the Skirt Board

  4. Step 4: Dry Fit and Adjust

  5. Step 5: Install the Skirt Board

How to Scribe and Cut a Stair Skirt Board to Fit

Outline for scribing and cutting a stair skirt board to achieve a snug fit against the wall and risers.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Cut and Install the Skirt Board — How to Scribe and Cut a Stair Skirt Board to Fit | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.