Understand Stair Dimensions
From How to Scribe and Cut a Stair Skirt Board to Fit · Step 1 of 5 · Video by stairbuilding

Showing 0:00–0:26 of the source video. Watch the full video with every moment.
What happens in this clip
The video begins by explaining the specific dimensions of the stair nosing and tread thickness, which are crucial for accurately marking and cutting the skirt board. In this example, the nosing overhang is 1 inch, and the tread thickness is also 1 inch. It is important to note that actual stair dimensions might vary and should be measured accurately.
Goal: Identify critical stair dimensions (nosing overhang and tread thickness)
About the full video
This video demonstrates two methods for installing a skirt board on a stairway that features an overhang (nosing) on the steps. The first method involves marking and cutting the skirt board to precisely fit around each nosing. The second, easier method involves cutting a section of the stair tread's nosing to allow the skirt board to slide in directly, simplifying the skirt board cut.
Step 1 of 5: Measure and Mark Riser Heights
Using a tape measure, carefully measure the vertical distance from the nosing of each tread to the corresponding point on the wall. Mark these heights clearly on the wall. These marks will serve as critical reference points for transferring the stair profile to the skirt board.
Every video in How to Scribe and Cut a Stair Skirt Board to Fit
Step 1: Measure and Mark Riser Heights
- 0:00–0:26 Understand Stair Dimensions (this video)
- 7:29–11:09 Measure and Determine Cut Angles
- 4:48–7:28 Layout Straight Skirt Board
Step 2: Transfer Stair Profile to Skirt Board
- 0:26–1:49 Layout Skirt Board Profile
- 5:39–9:34 Mark Riser and Tread Cut Lines Using a Jig
- 0:03–0:07 Mark Initial Stair Profile
Step 3: Cut the Skirt Board
- 1:15–2:34 Trace and Cut Skirt Boards
- 2:44–4:14 Cut and Install the Skirt Board
- 19:55–24:58 Cut and Sand Skirt Board
Step 4: Dry Fit and Adjust
- 2:14–2:33 Test Fit and Adjust Skirt Board (Method 1)
- 11:24–12:39 Test Fit the Straight Skirt Board
- 25:53–26:23 Test Fit the "Open" Skirt Board
Step 5: Install the Skirt Board
- 1:58–2:58 Secure Skirtboard
- 13:28–15:24 Install Skirt Boards
- 3:40–4:14 Install Skirt Boards
How to Scribe and Cut a Stair Skirt Board to Fit
Outline for scribing and cutting a stair skirt board to achieve a snug fit against the wall and risers.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

