Test Fit and Adjust Skirt Board (Method 1)
From How to Scribe and Cut a Stair Skirt Board to Fit · Step 4 of 5 · Video by stairbuilding

Showing 2:14–2:33 of the source video. Watch the full video with every moment.
What happens in this clip
After cutting the recesses for the nosings, slide the skirt board into place against the stairs. If all the measurements and cuts were accurate, it should fit snugly and correctly. If the fit isn't perfect, minor adjustments can be made through additional trimming or sanding until the skirt board sits flush.
Goal: Ensure the skirt board fits snugly around the stairs
What's used
Tools
- Sandpaper
- Rasp
- Skirt Board (cut)
About the full video
This video demonstrates two methods for installing a skirt board on a stairway that features an overhang (nosing) on the steps. The first method involves marking and cutting the skirt board to precisely fit around each nosing. The second, easier method involves cutting a section of the stair tread's nosing to allow the skirt board to slide in directly, simplifying the skirt board cut.
Step 4 of 5: Dry Fit and Adjust
Hold the cut skirt board in place against the stairs and wall. Check for any gaps or areas where the board is binding. If necessary, use a block plane or sandpaper to make minor adjustments to the edges for a perfect fit against the wall and risers.
Every video in How to Scribe and Cut a Stair Skirt Board to Fit
Step 1: Measure and Mark Riser Heights
- 0:00–0:26 Understand Stair Dimensions
- 7:29–11:09 Measure and Determine Cut Angles
- 4:48–7:28 Layout Straight Skirt Board
Step 2: Transfer Stair Profile to Skirt Board
- 0:26–1:49 Layout Skirt Board Profile
- 5:39–9:34 Mark Riser and Tread Cut Lines Using a Jig
- 0:03–0:07 Mark Initial Stair Profile
Step 3: Cut the Skirt Board
- 1:15–2:34 Trace and Cut Skirt Boards
- 2:44–4:14 Cut and Install the Skirt Board
- 19:55–24:58 Cut and Sand Skirt Board
Step 4: Dry Fit and Adjust
- 2:14–2:33 Test Fit and Adjust Skirt Board (Method 1) (this video)
- 11:24–12:39 Test Fit the Straight Skirt Board
- 25:53–26:23 Test Fit the "Open" Skirt Board
Step 5: Install the Skirt Board
- 1:58–2:58 Secure Skirtboard
- 13:28–15:24 Install Skirt Boards
- 3:40–4:14 Install Skirt Boards
How to Scribe and Cut a Stair Skirt Board to Fit
Outline for scribing and cutting a stair skirt board to achieve a snug fit against the wall and risers.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

